12- to 24-Inch

Primo tires designed for wheelchairs. - Gray tires for wheelchair - ISO diameter = 540mm

The CST Decade was designed for flatland BMX riding. - Smooth tread profile with no knobs to interfere with your feet while performing tricks

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead - Size: 12 1/2 x 2 1/4

- Recreational tire with raised center, slight lateral grooves for traction - Size: 24 x 1 3/8

- Urban/recreational tire with shallow, grooved tread for multiple conditions - 16 x 1.75

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

- New tread design, improved compound and quality workmanship - The Schwalbe One sets a new benchmark in terms of quality and performance

- BMX tire with medium knobs for traction

- Balloon tire with grooved tread - Large air volume for added shock absorption - Wire bead - Size: 24 x 2.125

- MTB tire suitable for road use with shallow, raised center knobs - Size: 24 x 2.125

- Entry-level BMX-style tire with sturdy casing for longevity

- Cruiser tire with large air volume for shock absorption - Wire bead

- Classic MTB tire with large, widely spaced knobs - Excellent for use on hardpack

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead - Size: 18 x 2.125

Classic knobby BMX tread now available in multiple colors with skin sidewalls. - Wire bead - 30 TPI

- Wide fast-rolling street-style tread that extends all the way to the sidewall - Large channels and siping help evacuate water quickly and provide a plush smooth ride - Wrap-around tread extends into the side wall for predictable turning even when running low PSI - ISO: 406 - Bead: Wire - PSI: 20 - TPI: 30

A classic MTB tire with large, widely spaced knobs suitable for all conditions. - ISO: 406 - Bead: Wire - PSI: 65

If you load your bike with heavy cargo or need an extra bit of traction for an extended haul, the Tour Guide Tire is your beast of burden! Its shoulder-to-shoulder sipes, combined with a thick tread cap, and puncture protection equip this tire with reliability for conditions most cyclists would not attempt to conquer. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

- Gray tread, sidewalls with raised center and lateral knobs - 24 x 1-1/4 (ISO 547) - 24 x 1-3/8 (ISO 540)

OS20 diameter BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - CYLEX 120 TPI superlight casing - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness - OS20 utilizes a larger diameter tire design to increase rolling efficiency Compatibility: - Must use with specific OS20 frames and rims, however many forks will accept this tire sizing currently - ISO Diameter = 451mm - NOT compatible with standard 20-inch BMX rims (ISO Diameter = 406mm)

The CULT x Vans tire features Vans' classic waffle pattern. - Grippy in all situations - High-pressure sidewalls

Box One™ 120 TPI Folding Tires were engineered with a minimalist approach to hit lofty goals for weight, traction, rolling resistance, and rebound. At its heart is a super-supple 120TPI casing where we forced in as much rubber displacing nylon as possible. Skin walls are employed to reduce drag and further reduce weight. We flanked the high-density casing with a tightly packed hoop of aramid fibers. Finally, we draped this all with BMX race-specific tread that transitions from a center band with a large contact patch to unidirectional tactile knobbies on the sides. This aggressive combination allows for maximum traction out of the gate, immense adhesion in the corners, and low rolling resistance in the straights. A state-of-the-art mixture of compounds is used in various areas of the apex, wall, bead seat, and center – with higher silica content in the tread to again remove more weight. Note: Not a tubeless tire FEATURES: - 120 TPI High-Density Casing - Aramid Folding Bead - High-Traction Directional Grooves for Starting Gate Grip Point - Low Rolling Resistance Center Strip Chevrons - Countless Ramped Hexagonal Directional Knobbies

Stare down rough terrain with this burly yet sleek tire. The Utility Player offers comfortable off-road exploration with modern, openly spaced treads and wide 2.25-inch casing. A broad spectrum of diameters gives you choice for fit. You still standing there? - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

- Premium mobility for design enthusiasts. - Urban profile packed with the latest technology. - The perfect symbiosis between light-rolling and puncture protection reflected in this specialized tire designed for the City Jungle. - Faster? Not a problem with approval for E-Bikes up to 50km/h! PureGrip Compound Based on activated silica compounds, this technology was originally intended as a performance level compound, but after intensive development at our Korbach Research and Development Department Facility, an advanced new compound with outstanding grip and cross-country properties was developed. This new rubber mix, given the self-explanatory name "PureGrip", is ranked just behind our BlackChili Compound and is being used in our performance products both in the road and mountain bike sectors. While providing great grip, it is also long-lasting and highly durable—both characteristics of Continental tires, which are exclusively manufactured in the factory in Hefei (Asia). SafetyPro The new SafetyPro Breaker designed from nylon textile. Cross-woven textile fiber netting that is simultaneously robust and flexible. Maximum puncture protection with minimal added weight. The risk of punctures resulting from glass or sharp stones is substantially reduced. E50—Suitable for E-Bikes For our E-Bike tires, we relied on over 100 years of experience with moped and motorcycle tires. All of our city/trekking tires are rated to a standard speed of at least 25 km/h. Those tires marked e50 are also certified for S-Pedelecs. With their high-quality structure, puncture protection is high and the rolling resistance is low, offering protection from premature wear brought about by the additional driving force.

The CULT x Vans tire features Vans' classic waffle pattern. - Grippy in all situations - High-pressure sidewalls

A highly versatile front and rear race tire option that strikes a balance between speed and control with Tioga's GripPod technology and Nano Knob tread design - CYLEX 120 TPI ultralight casing - PneuMax 110 PSI high-pressure inner coating - AvntGUARD cut protection membrane - UTC rubber compound - Grip-Pod system helps maintain traction when cornering - Chemical etching on center tread creates a fine texture for enhanced traction

Front and rear BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness

Mike Aitken's signature tire now available in Odyssey's lightweight and foldable K-Lyte option. This is the go-to tire for riders wanting to emulate Mike’s legacy as an all-around shredder. Low profile treads makes this a fast, versatile tire that can be used on any terrain. Whether you’re riding street, dirt, or park, this tire can do it all - just like Mike.

The Kwick Two tire shares the same versatile tread pattern as the Kwick Nine and Kwick Seven.5. Featuring K-Shield protection for puncture resistance and a reflective sidewall for better urban visibility, the Kwick Two is ready for your urban adventures! - Premium Trekking, Comfort, or Commuting tire - Front and Rear application - K-Shield (KS) is a layer of light, flexible rubber containing aramid and ceramic particles inside the tire under the tread area only. Designed to prevent punctures and increase tire life - Reflective stripe on sidewalls for added safety

- Park/street tire, with directionally grooved tacky tread - Wire bead - Available in three widths

A highly technological BMX race tire that utilizes multiple grip surface sections designed to help riders increase rolling efficiency, acceleration, cornering grip and control. - CYLEX 120 TPI ultralight casing - UTC rubber compound - Serrated tread design increases grip during hard acceleration - Grip-Pod system helps maintain traction when cornering - Ultra-low profile tread is designed to minimize rolling resistance - PneuMax 110 PSI high-pressure coating

The Cross Town is an extremely rugged tire that can handle the worst urban roads. The tread is deep and aggressive, perfect for shedding water in wet conditions. - PR Breaker; puncture resistant belt under the tread with a strong fiber composition - Thick 4.0mm heavy-duty tread with additional 6mm protective strip of rubber under the tread wards off punctures from the worst the city can throw at you - Tread designed to channel water away from tire - Reflective sidewalls for night visibility Specs: - Labeled Size: 16 x 1-3/8 - PSI: 107 - ISO Width (mm): 35 - ISO Diameter: 349 / 16" Recumbent - Flat Protection: Tread - Tire Intended Use: Road, Touring-Hybrid - Defined Color: Black - Tire Type: Clincher - Tire Diameter: 16" - Tire Bead: Wire

Cruise in style with Schwalbe's Big Apple tire. Their wide, round Balloonbike profile provides natural cushy suspension, and it rolls easily thanks to the smooth tread.

Designed by former World Champion, Olympic silver medalist and G.O.A.T contender Sam Willoughby, the Siren Pro offers BMX racers unparalleled performance on any track. Lightweight and fast-rolling, the 120 TPI, tubeless-ready tire rails turns, smooths out technical straightaways, and provides insane grip on the gate and out of corners. - Supple 120 TPI shaped casing - Center slick design for gaining maximum speed - Super-narrow gaps in the center tread grip the start gate without flexing - Wider gaps on the shoulder provide max grip when cornering

Kenda Kwest High Pressure Road tire is designed with a smooth rounded tread with large water dispersion grooves. - The Kwest High Pressure Road Recumbent tire is constructed of a steel bead and rates at a max of 100 PSI

The CULT x Vans tire features Vans' classic waffle pattern. - Grippy in all situations - High-pressure sidewalls

Kenda K-Rad - Checkerboard-shaped knob design - Knurled tread surface for traction and control - Ribbing between knobs strengthens the casing - Kenda endorses the use of fluid based sealants only in specifically designated Kenda sealant compatible tire

The Speedster is a high performance race and dirt jump tire designed for speed and minimal drag on hard packed or paved terrain in wet or dry conditions. - Honeycomb center tread provides added traction and increased speed with very low rolling resistance; large diamond shaped side knobs give extra grip and cornering control - Large diamond shaped side knobs give extra grip and cornering control - Low Specific Gravity Compound is lightweight and designed for high speed

The Jake Seeley signature Street Sweeper tire features a directional, dual compound construction. - Center tread features softer durometer - Side tread features a harder durometer to withstand grinds

Cruise in style with Schwalbe's Big Apple Performance tire. Their wide Balloonbike profile provides natural cushy suspension, and it rolls easily thanks to the smooth tread. Plus, you get their RaceGuard puncture protection and lightweight Endurance rubber compound for confident handling.

- Versatile tread with good grip and easy rolling - MTB tire at a low price

- Freestyle BMX tire

Born in BMX racing competition, Speed Booster is designed to meet the demands of lighter weight, better stability when cornering, good rolling resistance at high speed and grippy contact to the track, thanks to new developed LSG+ compound that is used exclusively for the Speed Booster. - Folding bead BMX race tire - LSG+ compound: Based on Vee's roadbike compound with 66 hardness now applied for BMX racing with great rolling resistance for hard pack circuit but at the same time holds grip from start, with fast cornering

Dirt-to-pavement versatility - BMX, urban assault, or dirt jump - Inverted knob design The Holy Roller is one of those "set-it-and-forget-it" tires. Mount up a pair of Holy Rollers on your BMX or DJ bike and you'll be ready for the next session no matter where it's happening—dirt, street, or park.

Park/street tire, with directionally grooved tacky tread. - ISO: 355 - Bead: Wire

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead

The Rekon is an aggressive trail tire inspired by the Ikon - Designed for aggressive XC trails - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this, you can race more and scout less with the Rekon.

Kenda K126 Street tires are designed for a variety of paved road conditions while providing comfort at a economical price. Fits older Schwinn Sting Ray 20" wheels.

The Mike Aitken signature Aitken tire features a tread pattern for street and dirt and is ideal for use at high speeds. - Dual ply casing

- The new incarnation of the Minion DHR. Ready to shred any line - Excellent cornering traction - Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo! - Plus sizes available - Wide Trail casing optimized for 30—35mm rims

- Large volume tire for comfort

- Trails, corners, berms, tables, kickers and everything else that's fun to ride are where the NEW HANS DAMPF feels most at home. - Extended limits due to greater stability, durability and performance. - Semi-open block arrangement for excellent self-cleaning with low rolling resistance - Aggressive smaller shoulder blocks for grip and control on loose and loamy ground

Front and rear folding bead BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. The S-Spec version utilizes Tioga's thinnest sidewall for maximum suppleness and weight savings. - CYLEX 120 TPI superlight casing - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness - ISO diameter: 406mm

Drop. The. Hammer. - Grooved slick tread design - Lightweight casing While originally designed as a BMX race tire, the DTH has found success beyond the track, including street riding, pump track, skate park, and slopestyle. The grooved slick maximizes rolling speed by minimizing drag.

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

Kenda Kwest High Pressure Road tire is designed with a smooth rounded tread with large water dispersion grooves. - The Kwest High Pressure Road Recumbent tire is constructed of a steel bead and rates at a max of 100 PSI

Primo tires designed for wheelchairs. - Gray tires for wheelchair - ISO diameter = 540mm - 75psi

Based on the popular Path tire from the early 2000's, The Path Pro has been fully redesigned to meet today's riding styles. This includes a proprietary rubber compound that is both extra-grippy and long-lasting, bigger sizing options, and an all new tread pattern inspired by the original with a smooth center tread and knurled side blocks. - Directional tread pattern with smooth center tread - Proprietary rubber compound - Improved grip & wear resistance - Micro-knurled side blocks