Topeak's Road MasterBlaster is spring loaded to fit on your frame without any clamps or brackets and its aero aluminum barrel might even speed you up! Plus, the Master sports an aluminum thumblock that fits all valves, an integrated dust cap and padded ends that won't scratch your frame.
- Ball-inflating needle for footballs, basketballs and more
Air Force Tier Three floor pump - Premium Rubber Overmolded Ergonomic Handle - Top Mounted 2.5" Analog Pressure Gauge (PSI/BAR) - Larger More Stable Pump Base - Simple Valve Head (Presta/Schrader) - Integrated Hose Keeper - All Metal Barrel and Pump Base - 28 1/2" Pump Height
Allows you to reach into difficult places with your Prestaflator hose. Great for cleaning and drying parts on-or-off the bike. If the tip is blocked, The safety feature releases air away from your work so you can maintain control. Can also be used to inflate low pressure vinyl-valve items (beach-ball type). The safety release feature will help prevent over-inflation. Made with 6061-T6 Alloy – it’s as strong as Brass and only 1/3 the weight. Note: The safety feature is only functional when the tip is used on a Prestaflator.
Planet Bike's redesigned ALX floor pump is rugged and accurate. Its smooth stroke, big 3" integrated gauge and no-fuss Auto Head will get you back up to pressure. More than just a work horse, the striking red anodized barrel and classic wood handle make this pump a thing of beauty. - Lightweight anodized 6000 series aluminum barrel - Classic wood handle for comfortable air compression - Auto Head fits both Presta and Schrader valves - Oversized 3 inch 160 psi dial gauge - Pressure rated to 200 psi - Needles included for pumping up sports balls - Large steel base for stability - Rebuildable - Height: 27”
Give your tires a kiss of air with Planet Bike's Air Kiss CO2 Inflator. It fits Presta and Schrader valves, holds fast thanks to the thumblock head, and inflates in a jiffy. The cartridge is insulated with a sleeve to prevent frozen fingers during use, and the small size means the Air Kiss fits easily in bags, pockets and packs. A 16-gram cartridge is included.
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
$28.99 - $29.99
Lezyne's lightweight, powerful HP Drive mini-pump quickly inflates your road bike tires so you can get back to pedaling. Its aluminum barrel and no-slip Carbon Matrix handle help you get pumped up to 120 psi in a flash. And, making your inflation experience even easier is a Presta/Schrader-compatible hose that stows inside the handle when not in use. - Small: 170mm, 77g - Medium: 216mm, 90g *Note: Blue color not available in the United States
$28.99 - $29.99
Lezyne's lightweight, powerful HV Drive mini-pump quickly inflates your mountain bike tires so you can get back to pedaling. Its oversize aluminum barrel and no-slip Composite Matrix handle help you get pumped up to 90 psi in a flash. And, making your inflation experience even easier is a Presta/Schrader-compatible hose that stows inside the handle when not in use.
Lezyne's Micro Floor Drive HV is a powerful mini-pump that thinks it's a floor pump. Its fold-out foot peg, high-volume barrel and aluminum construction make it easier than ever to pump up to maximum pressure of 90psi and get back on the trails. You'll also appreciate the ergonomic handle, extra-long hose and Presta/Schrader-valve compatibility.
XLAB's versatile Multi-Strike Repair Holder provides fast access to your repair kit, whether you have tubular or clincher tires. Carry CO2s and an inflator on one side and a spare tube/tire or pump on the other! - VERSATILE MOUNTING - Will mount on DELTA single bottle systems or at the rear of the XLAB CARBON WING and SUPER WING (each sold separately) - STORAGE SAVER - Mounts to your hydration carrier (sold separately), saving space in your storage bag for your cell phone, nutrition and other important items - FAST ACCESS - Simply unscrew, and attach your inflator and CO2 cartridges. Simply unstrap your spare tire, tube or inflating foam sealant. - The CO2 Holder holds 2 CO2 Cartridges (included), and a NANOFLATOR or SPEED CHUCK inflator (each sold separately) - The Multi Holder can hold a tube, inflating foam sealant, TIRE MATE or tubular tire (each sold separately - must purchase optional XCW STRAP if storing a tubular tire) - Glass Reinforced Nylon - Chassis weight: 30 grams Includes: - Center Plate - Multi Holder - CO2 Holder - 2 AIR STRIKE CO2 Cartridges - Hardware Popular Clincher Setups (accessory items sold separately) - Tube & tire levers on Multi Holder. Two CO2 and a NANOFLATOR inflator on CO2 Holder. - 4 CO2 cartridges and NANOFLATOR inflator. (Purchase an extra CO2 Holder) Popular Tubular Setups (accessory items sold separately) - Tubular tire on Multi Holder. Two CO2 & NANOFLATOR inflator on CO2 Holder. - Tubular tire and inflating foam sealant. (Purchase an extra Multi Holder)
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
- Complete packaged system containing all essential items for training and Sprint race distances • Includes the key -items for training - Includes essentials you need for short triathlons - Supplies your hydration, nutrition, and repair storage needs along with inflation accessories Includes: - TORPEDO SYSTEM 50: Refillable 26 oz aerobar mounted hydration system. No tools required for installation. - STEALTH POCKET 100: All-purpose nutrition & repair top tube storage bag accommodating most bikes - NANOFLATOR: Easy to use inflator, with a twist to inflate function, for controlled inflation - AIR STRIKE CO2 cartridge: One 16 gram CO2 cartridge
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
$11.99 - $16.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately
Mounting Kit for Mountain Morph and Turbo Morph G.
Replacement parts for JoeBlow Pro and JoeBlow Booster.
Topeak’s TwinTurbo technology is a new concept for floor pumps that will save up to 50% of your time and effort. For over 25 years, Topeak engineers have had one dream in mind. Create the ultimate floor pump. It must have high pressure air output and massive volume delivery to fill both road and MTB tires easily and efficiently. TwinTurbo technology utilizes the pull and push of every stroke by transferring air between its two barrels. Pulling the handle up moves a massive amount of air volume from the larger barrel into the smaller barrel. Pushing the handle down compresses the air in the smaller barrel into high pressure output that fills road tires with high pressure, or MTB tires with large volume. No matter the type of tire, the JoeBlow Twin Turbo will literally blow you away. - Head: SmartHead DX1 full metal pump head w/ air release button & x-long hose - Gauge: 200 psi / 14 bar - 3” Top mount analog - Base: Aluminum / Rubber pad - Barrel: Anodized aluminum - Handle: Oversize padded - Added Features: Dunlop valve adapter Ball / Bladder heads Hose dock - Size: 72 x 28 x 21 cm / 28.3” x 11” x 8.3” - Weight: 3 kg / 6.61 lb
An easy-to-read top-mounted digital gauge with rubber bumper impact protection delivers accurate tire pressure readings up to 200psi / 14bar. The large padded handle provides comfort while the wide steel base keeps everything stable. The extra-long hose can even reach bikes mounted in a work stand. The SmartHead DX3 automatically adjusts to fit Presta or Schrader valves and a new lower-profile air-release button allows fine tuning of tire pressure while preventing unintended pressure release. - Head: SmartHead DX3 w/ air release button & extra-long hose - Barrel: Painted steel - Gauge: 200 psi / 14 bar, Top mounted digital (Tolerance : < 100 psi ± 1 psi / > 100 psi ± 1%) - Unit: psi, bar, kg / cm² - Battery: CR2032 x 1 (included) - Volume Per Stroke: 337cc - Handle: Oversize padded / Dual density polymer - Base: Hardened steel - Cushioned rubber for digital gauge protection, auto off, Dunlop valve adapter, Presta valve adapter, Ball / bladder heads, Hose dock - Size: 73.5 x 25.5 x 16.4cm / 28.9" x 10" x 6.5" - Weight: 1.97kg / 4.34lb
Topeak's Micro Rocket AL is a small pump that packs a punch. Small in stature, this 6.3-inch pump is a giant in tire inflation. It utilizes a compact, single-action design to blast tires up to 160 psi.
Topeak's Mini Dual DX is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, their thumb-lock SmartHead ensures an airtight seal on both Presta and Schrader valves.
Topeak's Mini Dual DXG is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. Topeak's thumb-lock SmartHead ensures an airtight seal on both Presta and Schrader valves and the built-in gauge lets you top off your tires with precision.
Topeak's Mini Dual G is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. Topeak's thumb-lock head ensures an airtight seal on both Presta and Schrader valves and the built-in gauge lets you top off your tires with precision.
Topeak's Mini Morph is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Mini Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose and a T handle. A frame mount is included, too.
Mounting kit for Mini Morph and Road Morph G.
Big volume barrel while Dual-Action (DA) doubles volume with each stroke and inflates tires up to pressure fast. Integrated dust cap keeps pump head clean and thumb lock lever insures air-tight seal. Specs - HEAD: Presta / Schrader / Dunlop with integrated dust cap - BARREL: Aluminum - THUMB LOCK / HANDLE: Plastic - CAPACITY: 60 psi / 4 bar - VOLUME PER STROKE: 81.4 cc (pull + push) - SIZE: 22.3 x 4.6 x 3.4 cm / 8.8” x 1.8” x 1.3” - WEIGHT: 126 g / 4.44 oz Added Features - Dual-action pumping head - Side mount bracket
Larger barrel version pumps more air volume for MTB riders. Large integrated 1-1/8" diameter easy-to-read analog gauge provides the perfect inflation every time. Dual-Action (DA) doubles volume with each stroke and inflates tires up to pressure fast. Integrated dust cap keeps pump head clean and thumb lock lever ensures an air-tight seal. - Head: Presta / Schrader / Dunlop with integrated dust cap - Barrel: Aluminum - Thumb Lock/Handle: Polymer - Capacity: 60psi / 4bar, 1-1/8” Analog - Volume Per Stroke: 82 cc (pull + push) - Side mount bracket secures to water bottle bolts - Size: 25.3 x 4.6 x 3.4cm / 10” x 1.8” x 1.3” - Weight: 152g / 5.36oz
Page 1 of 8 Next page