Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories
$79.99
Shimano BT-R1A External Di2 Battery
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware
- Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems
- Battery weight: 71 grams
$39.99
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- The RPM speed installs easily with no magnets required
- It only weighs 16.5 grams with the mount included
- Provides accurate speed data during your ride
- Mounts on most front wheel hub with a secure silicone casing
- Two LED lights show the sensor's device connection (blue) and speed detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM Speed will fit with most bikes and frame sizes
$166.99
- Di2 internal battery, fits all e-Tube Di2 groups
- Capacity: 500 mAH (± 2000km)
- Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets
- Requires SM-BCR2 charger
$64.99
CatEye's ANT+ Speed/Cadence Sensor works with any ANT+ compatible cyclo-computer, including CatEye's Stealth EVO+, to give you speed and cadence data, so you can improve your cycling and track your rides. Attack each ride and celebrate your successes on the bike!
$5.00
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705.
- Glass-filled nylon, stainless steel Torx T25 bolt
- Weight: 20g
$15.99
Wire harness and hardware to measure computer data based on the front wheel.
- Fits most bars bars (25.0 to 31.8mm), 86cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties
- Compatible with: Protege 5.0, 8.0 and 9.0
$64.99
The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter.
- Max combo mount is compatible with GARMIN Cycling Computers smaller than EDGE 1000, 1030 style (example EDGE 820)
- Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface
- GARMIN approved replaceable computer insert protects computer tabs
- CNC Machined Aluminum, Anodized Black with laser etched logos
- Made in-house, Boise, Idaho USA with a Lifetime Warranty
- Weight: 60g
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 22mm-29mm diameter
$154.95
EPS cable kits come in multiple options that allow for the mounting of the power unit beneath the bottom bracket or beneath the saddle.
- Weathertight o-ring sealed connectors
- Fitting the V4 internal interface to the handlebar (only right-hand side) requires two cablings - 1 cabling from the interface to the Ergopower controls, and 1 cabling from the interface unit to the power unit
- 100mm from the interface unit to the splitter
- 340mm from the splitter to the right-hand side Ergopower control
- 1300mm from the splitter to the left-hand side Ergopower control
- 800mm from the interface unit to the power unit
$19.99
Enjoy easy viewing with the Butler Out Front handlebar mount!
Out Front Mount for following models:
BC 1909 STS
BC 2209 STS
ROX 5.0
ROX 6.0
ROX 8
ROX 8.1
ROX 9
ROX 9.1
*Note: not for use with ROX 10.0
$11.99
Need to hold down your GoKASE or DriKASE iPhone case? If you have multiple bikes, an ATV, or stroller, the Xtended X Bracket will allow multiple mountings with GoKASE or DriKASE iPhone cases.
• Fits handlebar diameters 22mm to 34mm
$5.00
Replacement magnet for MSW Miniac Double Speed & Cadence computers. Includes water-resistant cadence magnet and four plastic zip ties for mounting to pedal crank arm.
$99.99
With the new FAZUA 12V Car Charger, the FAZUA Battery 250 and 250 X can now also be conveniently charged in the car while on the move. For the power supply, the 12V Car Charger can be connected either to a suitable on-board power socket (in accordance with DIN ISO 4165) or to a cigarette lighter.
- Charging time 3-4 hours
- For Battery 250 and 250X
$32.95
Telescoping Garmin Computer Mount for Versa Plates. Raise the computer up for Refill Bottles, or lower it down to clear Standard Bottles. On-the-go tilt adjust to avoid glare.
- Telescoping computer mount makes for a seamless switch between Refill or Standard Bottle
- Compatible with Garmin bike computers and Multisport Watches
- Requires Versa Carbon Mount or Versa Aluminum Mount
Telescoping Garmin-Specific Computer Mount
- Raise the computer mount up to tuck in a Refill Bottle for race day, or seamlessly lower it down for a Standard Bottle to maintain the optimal view for training days. Compatible with Garmin bike computers and multisport watches.
On-the-Go Computer Tilt Adjust
- Avoid changing glare with a tilt mechanism for easy adjustments while you ride
Arrives Fully Assembled
- Few steps required to install and head out on your first ride
- Weight: 1.9oz (54g)
- Construction: Nylon Composite
Includes
- Fully assembled computer mount
- 2 screw sets: one for Versa Carbon Plates, and one for Versa Aluminum Plates
Warranty: Limited Lifetime
$184.99
The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected).
- Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series
- Li-Ion type
- Capacity: 500 mAH |3.7Wh (± 2000km autonomy)
- Rated voltage: 7.4V
- Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately)
- Fixing small parts included
- Weight: 52g
$38.00
Seamlessly connected.
This SP Connect kit allows any smartphone case to be connected to the Intellimount Stem for a tidy dashboard on your bike.
Highlights:
- Fits most smartphone cases
- Includes Intellimount adapter, adhesive mount and stand tool
- Compatible with all SP products
Previous page
Page 3 of 3