Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Electronics

Pro Steerer-Mounted Di2 Battery Holder
$12.99
• To position the Shimano Di2 battery inside the fork steerer • Including stainless steel tool to remove the set.
Planet Bike Protege Rear Wheel Bracket - 130cm Wire & Hardware
$13.99
Wire harness and hardware to measure computer data based on the rear wheel - Contains bracket with 130cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties - Bracket fits most bars (25.4 to 31.8mm) - Compatible with: Protegé 5.0, 8.0 and 9.0 - Ideal for rear wheel indoor bicycle trainers
Topeak RideCase ArmBand
$14.95
Specifically designed for the RideCase series, the RideCase ArmBand conveniently holds your smartphone and is perfect for indoor and outdoor activities. The wide medical grade elastic band and silicone grip provides extra comfort and security while the 3M reflective highlight adds a margin of safety in low light conditions. - Material: Elastic band & engineering grade plastic - Attachment: Hook and loop fastener - Compatibility: RideCase & SmartPhone DryBag series - Fit Arm: 17-45 cm / 6.7”-17.7” - Size: 11.2 x 6.8 cm / 4.4” x 2.7” - Weight: 40 grams
Garmin Bicycle Mount Kit
$14.99
Garmin's Bicycle Mount Kit lets you attach any compatible Garmin to your bike's handlebars, so the data stays out in front where you can see it.
Garmin Silicone Case (Edge 820)
$14.99
Protect your Garmin Edge 820 (sold separately) with a form-fitting, silicone case and keep your mind at ease. Choose from a variety of cool colors to match your personal style.
MSW Miniac GPS Handlebar Mount
$14.99
Handlebar mount to fit Miniac 322 and 333 GPS computers. Fits up to 31.8mm round handlebars. Plastic construction with rubber shim. - Keeps handlebar clean - Adjustable height angle for better visibility during riding - Simple one bolt attachment
Sigma Sport Wired universal computer mount
$14.99
Sigma's universal computer mount features a wired speed sensor, so you can use your Sigma cyclo-computer on a second bike. This kit comes with O-rings and a spoke magnet.
CatEye Out Front Bracket
$15.00
CatEye's Out Front Bracket frees up your handlebars and positions your favorite CatEye computer just in front of your stem for optimal viewing and accessibility.
XLAB Aero Computer Mount Gen 2
$15.95
With aerobars, short stems and hydration systems crowding the front end of your bike, it's hard to mount a computer. But, with Xlab's Aero Computer Mount Gen 2 you can mount your computer to your stem cap! It's aero because it fits neatly behind aero drink systems and horizontally mounted bottles, and the extra height of the mount makes your computer easier to read. It can also be mounted on the Xlab Torpedo Mini Mount, placing your computer in front in your line of sight. • The Aero Computer Mount, re-designed! Aerodynamically designed and longer to support larger screen computers • Mount in front of Torpedo Systems or on stem bolt • Helps reduce drag from a computer mount with one that was designed with aerodynamics in mind • Mount in front of TORPEDO SYSTEM (sold separately) for optimum viewing. • Mount on stem when using non-XLAB drink systems (sold separately) • Easy to read when in aero position • Fits most computers including the new longer form factor models (sold separately) • Mount is 37 mm wide. Plenty of room to support the popular Garmin computers (sold separately) • Includes hardware and instructions • Weight: 29.5 grams
Origin8 Data Station 8
$15.99
Origin-8's Data Station 8 is an affordable computer with all the basic, and some advanced functions to make every ride more fun. It has a large easy-to-read LCD screen and displays all your key ride data, like speed, average speed, speed comparison (to tell if you're traveling slower or faster than your average speed), trip distance, clock and riding time. There's even a handy scan mode that lets you set it to cycle through distance, maximum speed, average speed and time so you can track all four simultaneously. The Data Station runs on one LR43 battery (included) and features auto on/off for low power consumption.
No Image
$15.99
Wire harness and hardware to measure computer data based on the front wheel. - Fits most bars bars (25.0 to 31.8mm), 86cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties - Compatible with: Protege 5.0, 8.0 and 9.0
SRAM eTap BlipClamp
$16.00
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
SRAM eTap Outlet Adaptors
$16.00
- For charging batteries in European countries
XLAB Space Saver Computer Mount
$16.95
• When aerobar space is tight, place your computer on top • Tuck straw on either side for best aerodynamics • Fits on TORPEDO SYSTEM 100, TORPEDO SYSTEM 400 & REFILL UPGRADE KIT BOTTLES (each sold separately) • Compatible with most computers, including large screens (sold separately) • Glass-reinforced nylon • Weight: 18.5 grams
Lezyne GPS Front Bar Mount
$16.99
The Forward Mount is a hinged handlebar mount featuring a stiff and durable composite matrix construction with secure X-Lock and an integrated rubber shim. With a pressed-in stainless steel nut and 3mm hex stainless steel bolt, this mount's sleek, lightweight design positions the GPS computer in front of the stem for better visibility and improved aerodynamics. The X-Lock is a secure and reliable mounting feature integrated into the Standard GPS Mount and the Forward GPS Mount. It safely locks in the computer for worry-free riding over any type of terrain.
Minoura CS-500 Accessory Mount
$18.99
- Superlight computer/light mount fits cleanly underneath the stem - Replace a headset spacer(s) below or above the stem on any 1-1/8" steerer - 12mm stack height with 50mm wide mounting area, 120mm long angle adjustable arm
Minoura SWG-400 SwingGrip Clamp
$18.99
Keep your handlebar organized and your devices secure with the SWG-400 (28/35mm) SwingGrip from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - On Stem installation only - Lightweight and rustproof alloy construction - Angle adjustable arm design - Aluminum bar is position adjustable and uses Hex Bolt to install and remove
Topeak BarXtender
$19.95
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
BiKASE GoKASE Armband w/Bracket
$19.99
BiKASE's GoKASE Armband offers simple access to your phone while running. A reflective tab for safety also acts as a retainer for the extra slack in the earphone cords. • Material: TPU/Elastic band • Weight: 30g • Patent-pending cam lock system • Reflective pieces • Retainer to keep wires • Fits arms 8 to 15-inches in circumference
BiKASE Super Band
$19.99
Molded with Polycarbonate and Silicone rubber. Mounts to bike frame with rubber oring or use braze ons on bike. The 2 elastic bands will hold a phone, energy bar, pump, or sunglasses.
Delta Tablet Extension Arm For Handlebars
$19.99
Extension Arm holds tablets at comfortable viewing distance. - For use with trainers and spin bikes only - Compatible with all Delta Tablet Holders (sold separately) - Premium aluminum construction - Instant attachment and removal - Rubber coated to protect stem and bars
FSA Control Center Computer Mount
$19.99
- Control Center computer mount for any 31.8mm handlebar - Dual clamps provide superior holding power, excellent for GPS units
Garmin Silicone Case (Edge 1030)
$19.99
Protect your Edge 1030 with this form-fitting, removable silicone case.
Garmin Varia Seat-Post Quarter Turn Mount
$19.99
Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to the seat post of a second bike with this quarter-turn mount. Includes mount and 2 fitting shims.
Garmin Varia Universal Seat-Post Quarter Turn Mount
$19.99
Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to an aero or round seat post with this quarter-turn mount. Includes mount, 2 fitting shims and 4 O-rings.
K-Edge Combo Mount Interface
$19.99
Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.
K-Edge NiteRider Adapter
$19.99
This NiteRider Adapter is sold separately from K-EDGE “Combo Mount." - Precision Machined 6061-T6 Aluminum - Anodized Gunmetal - Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface - Enables compatibility with K-Edge GoBig Mounts and Combo Mounts - 2x M4 Mounting bolts with Nylok included - Compatible with Lumina Series, Mako Series - Weight: 11.5 grams
MSW CC-100 Miniac Wired Cycling Computer
$19.99
MSW Miniac computers are designed to be installed quickly and give the essential information riders need to best enjoy their trip. - Seven Functions: 12/24-hour clock, current speed, maximum speed, trip time, trip distance, total odometer speed, one-button design - CR2032 battery included - Wire harness included
Origin8 Outpost UL Bryton Handlebar Mount
$19.99
- Lightweight nylon fiber Bryton handlebar mount with 90-degree rotating mounting plate - Compatible with all Bryton computer models - Out-front mounting position centers the computer in front of the stem - Fits both 25.4mm and 31.8mm handlebars with included adapter
Origin8 Outpost UL Garmin Handlebar Mount
$19.99
- Lightweight nylon fiber Garmin handlebar mount with 90-degree rotating mounting plate - Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, and 1000 - Out-front mounting position centers the computer in front of the stem - Fits both 25.4mm and 31.8mm handlebars with included adapter
Campagnolo EPS Power Cable for Charger - US Standard
$20.00
- Compatible with Super Record, Record, and Athena EPS systems - Required for use with the charger and works with V2 systems - USA/North America plug - adapters required for other countries
Serfas Level 1.1 Wired Computer
$20.00
Easy to set up and easy to use, Serfas' 1.1 Wired Computer provides the riding functions you need and features a crystal clear display. • 9 functions • Handlebar and stem mountable • Multi-language compatible • Auto start/stop
SRAM QuickView Computer Mount (Road)
$21.00
SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. SRAM's QuickView Computer Mount also features a center-offset design so the computer (sold separately) can be placed directly in front of the stem, or flip it to position the computer behind the bar for MTB or cyclocross use. It works great with computers that use a 1/4-turn twist lock interface.
SRAM eTap BlipGrip
$21.00
External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
Minoura SGS-400-OS Clamp
$21.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
Minoura SGS-400-STD Clamp
$21.99
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter
Sigma Sport Butler - Out Front Mount
$21.99
Enjoy easy viewing with the Butler Out Front handlebar mount! Out Front Mount for following models: BC 1909 STS BC 2209 STS ROX 5.0 ROX 6.0 ROX 8 ROX 8.1 ROX 9 ROX 9.1 *Note: not for use with ROX 10.0
SRAM QuickView Computer Mount (MTB)
$22.00
SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. It works great with computers that use a 1/4-turn twist lock interface.
Zipp QuickView Road Low Computer Mount
$22.00
Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt
Zipp QuickView TT Computer Mount
$22.00
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
Garmin Charging Clip (010-11029-19)
$24.99
Complete two tasks with one cable using our charging/data clip. Connect the cable to your computer's USB port to recharge your compatible device and to transfer data to and from your computer. This cable also pairs with an optional AC adapter (sold separately). Compatible Devices: - Approach G10 Approach G10 - Approach S20 Approach S20 - Forerunner 230 Forerunner 230 - Forerunner 235 Forerunner 235 - Forerunner 35 Forerunner 35 - Forerunner 630 Forerunner 630 - Forerunner 645 Forerunner 645 - Forerunner 645 Music Forerunner 645 Music - Forerunner 735XT Forerunner 735XT - vívomove HR vívomove HR
Garmin Charging/Data Cable
$24.99
Complete 2 tasks with 1 cable using Garmin's charging/data cable. Connect the cable to your computer's USB port to recharge your compatible device and to transfer data to and from your computer. This cable also pairs with an optional AC adapter (sold separately). Compatible devices: - Approach S60, D2 Charlie, fenix 5/5S/5X, Forerunner 935, quatix 5, quatix 5 Sapphire, vivoactive 3, vivosport
K-Edge Fixed Garmin Stem Mount
$24.99
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The fixed version is recommended for zero degree or negative degree stem angles. Can also be used with positive degree stems if additional spacers added (5mm to 10mm) above the stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer. - Compatibly – 1-1/8" Steerer tube Diameter, Thickness (@ Steerer) – 5mm, Length (Center-to-Center) – 50mm, - Recommended for 0 Degree to Negative Degree Stem Angles - Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520, 800, 810, and Forerunner 310XT - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
K-Edge Gravity Top Cap Mount
$24.99
The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already have a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
K-Edge Gravity Top Cap Mount
$24.99
The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
K-Edge Wahoo ELEMNT Gravity Cap
$24.99
The K-EDGE Gravity Cap is a great computer mount option for those riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek computer mount. The Gravity Cap replaces your existing top cap and is ideal for Downhill, Enduro, Gravel, Touring, etc. - CNC Machined 6061-T6 Aluminum - Injection Molded Copolymer Interface - Compatibility: Wahoo ELEMNT - Lifetime Warranty - Weight: 18g - Anodized Colors: Black
K-Edge Wahoo Fixed Stem Mount
$24.99
An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. - Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI - Compatible – 1-1/8? Steerer tube Diameter, - Thickness: 5mm, Length 50mm (Center-to-Center) - Recommended for 0 Degree to Negative Degree Stem Angles - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Weight: 25g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
Planet Bike Protege Wireless Mounting Kit - Stem & Handlebar Hardware
$24.99
- Contains universal handlebar/stem compatible bracket, sensor and magnet - Compatible with Protege 9.0 wireless computer - Will not convert standard Protege 9.0 to wireless
Planet Bike Protegé 5.0 Computer
$24.99
Planet Bike's Protegé 5.0 is a great, no-nonsense computer. You want to know how fast you’re going, or how far you've ridden, or the time? It’s right there in big, bold numbers. In fact, this clever computer displays 4 readings at once so you have the data you need at a glance. The 5.0 mounts easily on your handlebars.
PowerTap Bluetooth Smart Dual Speed/Cadence Sensor
$24.99
PowerTap's Bluetooth Smart Dual Speed/Cadence Sensor gives you the ability to monitor your speed and cadence with your favorite Bluetooth-compatible device. It's sleek and easy to mount on your frame.
Sigma Sport BC 5.16
$24.99
With the BC 5.16, you will find the five most important bicycle functions in one small device. Despite the compact size, the display is large and clear. The big easy-to-press button switches between the displays quickly. Bike Functions: - Speed (kph/mph) - Trip distance - Total distance - Ride time clock Features: - Display functions using icons - Predefined tires sizes - Ride time up to 100 h - Adjustable scan mode - Automatic start/stop - Tool-free mounting - Watertight in accordance with IPX8
Sigma Sport Butler - GPS Out Front Mount
$24.99
Enjoy easy viewing on your Sigma Rox 10.0 GPS Unit with this out-front handlebar mount. *Note: Out Front Mount for SIGMA ROX 10.0 GPS ONLY. Will fit 31.8 mm diameter bars only.
CatEye RD300W Speed Sensor
$25.00
This Sensor works with the Strada Wireless RD300, Strada Wireless Universal CC-RD310W, Micro Wireless CC-MC200W, Urban Wireless CC-VT240W, and Urban Wireless + CC-VT245W.
Serfas Level 2.2 Wired Computer
$25.00
Serfas' Level 2.2 Wired Computer puts cycling knowledge at your fingertips. It provides 14 key functions controlled by 2 easy-to-use buttons, and displays your data big and bold. Other great features include a low reflection LCD and the option to select from several languages. And, whether you choose handlebar or stem mounting, installation is a breeze.
Barfly Wireless Cateye Mount
$25.99
- The first and only out front mount for Cateye cycling computers - Intended for everyone: Recreationalists, Enthusiasts and professionals - Compatible with all wireless Cateye cycling computers -- 31.8mm diameter handlebar clamp
Tacx GoPro Bike Mount
$25.99
Don't miss out on any action! The Tacx GoPro bike mount can be placed on the handlebar or saddle to record everything that happens in front or behind you. Installing the bracket on your bike is very simple. After placing the mount on your bike, you can insert the camera into the holder easily and quickly and you are ready to record. - Easily switch between mounting options - Handlebar adapter can be used on road or mountain bikes - Saddle adapter works with 7mm and 9mm diameter saddle rails and is also compatible with the Tacx Mudguard - Compatible with GoPro HERO and HERO +, GoPro HERO 2, GoPro HERO 3 and 3+ and GoPro HERO 4 and 4+ models - Also suitable for any other camera with a base identical to that of GoPro cameras
CatEye Velo 7
$27.49
CatEye's Velo 7 displays your speed, distance, ride time and more on its easy-to-see screen. It's simple to operate and understand, features a large, bright display, and has one large button for changing modes. You'll also love CatEye's tool-free Flex-Tight mount for easy installation and removal.
Origin8 Outpost Direct GoPro Mount
$27.99
- CNC machined AL6061 alloy GoPro mount for handlebars or seatposts - Accepts GoPro mounting style compatible accessories - GoPro mount rotates 90° for ideal positioning of accessories - Fits 22.2mm, 25.4mm, and 31.8mm handlebars with included adapter - Fits 27.2mm, 30.9mm, and 31.6mm seatposts with included adapter
Origin8 Outpost Garmin Stem Mount
$27.99
- CNC machined AL6061 alloy Garmin stem mount - Mounts to a stem`s faceplate by means of two included M5 x 18mm stem bolts - Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, 910, 920, and 1000
Origin8 Outpost UL Bryton/GoPro Handlebar Mount
$27.99
- LightweightnNylon fiber Bryton handlebar mount with CNC machined AL6061 alloy GoPro mount - Compatible with all Bryton computer models - Accepts GoPro mounting style compatible accessories - Out-front mounting position centers the computer and accessories in front of the stem - Fits both 25.4mm and 31.8mm handlebars with included adapter
Page 1 of 6 Next page