Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Racks

$64.95
- Great rack for long distance touring with side bar for additional strength and stiffness - Compatible with all MTX 1.0 and 2.0 bags - T6061 T6 10mm hollow tube alloy construction - Disc mounts allow for mounting to bicycles with disc brakes - 739g - 55lb weight capacity
$37.95
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
$7.99 - $13.99 $13.99 Up to 43% Off
- Used for attaching rear racks onto mono stay bikes - Rubber coated steel for all weather durability
$7.99 $13.99 43% Off
- Used for attaching rear racks to monostays or seatposts on bikes without traditional seatstays - Rubber coated steel for all weather durability
$79.99
Specifically engineered to fit a 12-pack of beer and your u-lock, this classy rack is ready to haul it all! Whether it's a run to the corner store, class, or just another day at the office the Urban Rack will cradle your essentials comfortably between its tie-down rails, or you can remove the rails to tote extra-wide loads all the way to your destination! - 9 1/2" wide x 11 1/4" long x 3" high for inside rail measurement.
$39.99 - $42.99 $42.99 Up to 7% Off
Planet Bike's Eco Rack is made of oversize tubular 6061-aluminum for maximum strength and stability. It's designed to provide complete heel clearance when you install packs. And, the pre-installed rack hardware makes it a cinch to mount the Eco Rack to your bike, too. This rack fits most road, mountain and hybrid bicycles and even includes a built-in platform, which doubles as a mini-fender on rainy rides.
$168.00
Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into. Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - Fits up to 29 x 3-inch tires, with room for fenders. - Front or rear mountable. - Works with all dropper posts. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The main rack frame is made of 1/2" (13 mm) diameter tubing for durability, and the pannier rails are 3/8" (10 mm) diameter to fit all panniers. - The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes. - The Divide come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Divide has a load capacity of 55lbs when eyelet mounted. - For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs! - Powder coated a sleek and refined shade of black. - 960g including all hardware and extenders. - Made in Taiwan. - Lifetime warranty!
$39.99
When it's time to ditch the backpack, the back soreness and the back sweat, look no further than the MSW Pork Chop Light Duty rack. It's got plenty of capacity for those key items on your journey. - W-bend stays keep pannier hooks in place - Fits most bikes with 26" - 700c wheels - Designed for bikes without disc brakes (for disc brake bikes, see RCR-100D) - Holds up to 40 lbs. of cargo - Top platform dimensions are 310mm x 112mm
$44.99
When it's time to ditch the backpack, the back soreness and the back sweat, look no further than the MSW Pork Chop Light rack. It's got plenty of capacity for those key items on your journey. This model is designed to fit bikes with disc brakes. - Fits bikes with disc brakes: offset with integrated spacer - W-bend stays keep pannier hooks in place - Holds up to 40 lbs. of cargo - Top platform dimensions are 310mm x 112mm
$70.00
Lightweight aluminum tubing, stainless steel hardware, and fully adjustable upper stays make the Pork Chop rack a durable addition to any bike. - Fits most 700c cantilever and disc brake bikes - Tubular aluminum construction, 10mm diameter - Stainless steel hardware - Fully adjustable upper mounting brackets - W-bend at bottom of rack for easy on-and-off of hook-style panniers - Platform Dimensions: 10.75 x 4.88" - Weight: 650g - Weight Limit: 40 lbs.
$69.99
This heavy-duty steel rear rack is made for towing Burley trailercycles. Pick up an extra to easily switch your Piccolo or Kazoo trailercycle between multiple bikes. The Moose Rack includes rack stays and hardware to mount to your bicycle.
$119.99 $140.00 14% Off
Built specifically to work with fat tire bikes, and designed to fit on the front or rear of your bike, this might be our most versatile rack. Fits fat and most tire sizes Our patent-pending adjustable width design will work with most fat bike frame, hub and tire widths, without having to twist or bend anything. Front or rear compatible Can't decide if you want to install on the front of the rear of your bike? Don't worry about it, this product does both easily. Disc brake compatible Sometimes these new fangled disc brakes get in the way of accessory installation. This product was designed to make sure that isn't an issue. Height and width adjustable Our patent-pending adjustable width design will work with most road and mountain bike hub and tire widths, without having to twist or bend anything. This rack will happily accommodate most road and mountain bike wheel sizes. This includes the diameters 26", 650b, 700c, 27.5" and 29" and widths from 23c up to 3". Aluminum construction Constructed of T6061 aluminum, this product is both lightweight and strong. Lifetime warranty
$135.00
Made of high-grade aluminum, the Outpost Rear World Touring Rack is one of the lightest of its kind. The weight savings does not mean that we sacrifice ease of installation, fit, or the stability that is gained from low rider mounting. Universal Fit System This rack offers more fitment flexibility than other systems, to fit more bikes. That's less time wasted during installation futzing with extra hardware or custom-fitting the mounts. Height Adjustable Adjustable height design works with most road and mountain bike hub and tire widths, without having to twist or bend anything Lightweight Constructed of T6061 aluminum, this product is both lightweight and strong. Lifetime warranty
$49.99 $64.99 23% Off
Axiom's Journey Adjustable 2429 Rack is made of light, rugged aluminum with vertically adjustable stays meaning it mounts on a wide range of rear wheel sizes. It handles even large, heavy panniers (sold separately) with additional looped struts that keep your panniers steady. There also is a platform on top, which adds strength and doubles as a mini fender.
$74.99
Axiom's Streamliner 29er DLX Rack centers loads close to the rear wheel for improved stability and handling on your 29er bike. It's made of reliable and lightweight aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.
$40.99 - $143.99
Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds
$165.00
The VO Porteur Rack is a traditional-style rack as used on the famed Parisian newspaper delivery bikes. Those Parisian delivery bikes were reputed to carry as much as 110lbs. of newspapers on similar racks (of course, the bikes had strengthened frames and forks, not just racks). Our Porteur Rack is made from strong stainless steel tubing and polished to a lovely shine. It won't rust like painted steel racks or fatigue and crack like aluminum racks. The quality is actually superior to that of many custom racks. In short, this is a real load-carrying rack, not an aluminum "style-rack". Yet total weight with rail, nuts, bolts, etc. is only 1.079kg. The platform is about 36cm x 29cm. A removable rail attachment is included and very handy for smaller packages. The tangs are pre-drilled to fit 700c, 27", 26", and 650b bikes. There are four bosses for a light attachment. There is a boss for securing your fender to the rack -- no rattling! Please also note the elegant pannier/tie-down loops above the mounting tangs. Mounting hardware is included. The Porteur Rack mounts to the dropout eyelet and the brake bolt (or fork crown hole). Max weight with this configuration is 25 lbs.
$7.00
These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.
$470.00
With the Airy, Tubus introduces the first carrier made of titanium. With a maximum load of 30 kilos and a weight of 233 grams, the tubus Airy breaks every record. Titanium is a very difficult material to work with since it can only be cut and processed with special tools and machinery. The material titanium is extremely corrosion resistant and strong, which makes the Airy carrier nearly indestructible. ADDITIONAL FEATURES: Weight: 281g/9.9oz Carrying Capacity: 30kg/66lbs.
$200.00
Our classic model—on the road around the world since 1988. This model is the basis for all of our rear carriers. CARGO has been tested and loved by its owners in tough daily routine since 30 years. CARGO is our all-round happy solution for transporting luggage on the bike. CARGO is good for your daily ride or as packhorse for your next world tour. It fits most bikes and carries most panniers. - Material: 25CrMo4 - Weight: 740 g | 26.1 oz (28'') - Loading Capacity: 26 kg (tested with 40 kg | 88 lbs) - Diameter: 10 mm | 0.4 in
$200.00
The most tried and tested all-round carrier updated for today’s challenges: 3D feet with perfect force absorption and integrated screw attachment. Comfortable mounting parts for mounting the stays to the frame. Including protection of tail light. If required, a spring clamp can be clicked onto the carrier. Armed for the next tour. - Material: 25CrMo4 - Weight: 780 g | 27.5 oz (28'') - Loading Capacity: 26 kg | 57.3 lbs (tested with 40 kg | 88 lbs*) - 10 mm | 0.4 in
$210.00
The COSMO is the flagship model for stainless steel Tubus carriers. It has a wider cargo area, extreme carrying capacity, and a longer back for better tail light protection. - Weight: 680g or 24 oz. - Load Capacity is 40kg or 88 lbs. - Wheel size 26? or 700c
$150.00 - $185.00
So, you have disc brakes, and only the best is good enough for you. Now, you can mount a Tubus carrier on your bike. Their Disco is designed to be combined with disc brakes. Instead of using added accessories, the Disco simply fits onto your frame. The carrier is easy to mount using the included quick release, or it can also be mounted on eyelets of the frame. Simply load up your bike and go. - Includes QR Skewer
$140.00
If your fork has inside and outside eyelets, then the DUO is your right choice. Just as the TARA, DUO tolerates extreme loads and almost all panniers. It also ­features a longitudinal hole for optimal fit and increased flexibility. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer, or by the bicycle manufacturer for mounting a carrier. There must be no crimping. - Material: 25CrMo4 - Size: 26" | 28" - Weight: 560 g | 19.8 oz - Loading Capacity: 15 kg | 33.1 lbs - Diameter: 14 / 10 mm | 0.6 / 0.4 in
$185.00
The Tubus Fly is made of two stainless-steel tubes, making it the purist in the lightweight class. This 369-gram masterpiece carries 18 kilograms of luggage, making this model one of the most efficient racks available. With the Fly, optical pleasure and high function work in perfect harmony.
$140.00
The Fly is a lightweight carrier designed to carry panniers on a fast road or cross bike. Created with narrower tires in mind, the V-shaped Fly Evo allows for a low profile while protecting the rear wheel. It also features 3D-feet for simpler mounting. A single adjustable strut mounts the Fly to the bake bridge, making it a minimalist's dream. - Weight: 330 grams/11 ounces - Capacity: 18kg/39 pounds - Wheel size: 26-inch/700c
$270.00
Low or high rider? Just take both! tubus presents the first combi-carrier that combines the properties of both systems: Lateral driving stability thanks to the low center of gravity, with space on top for bulky items such as a sleeping pad and sleeping bag. With the GRAND EXPEDITION FRONT for the front, you don't have to make any compromises when transporting luggage. This is tube. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer or the bicycle manufacturer for mounting a luggage rack. There must be no squeeze connections.
$255.00
The GRAND TOUR has what it takes to become a new tubus classic! With its narrow but functional loading area, it combines stability and extreme rigidity with a discreet appearance. The luggage carrier feet are reduced and designed as a minimalist tube construction. The GRAND TOUR packs the 26 kg payload with ease, making it almost indispensable on modern touring bikes. It provides faithful service thanks to its second loading level and the option of using a tensioning strap both lengthwise and crosswise.
$185.00
Made for traveling: The top rail is designed extremely narrow, still offering enough space to fit a tent, mattress and sleeping bag. Your panniers are mounted one level down. This lowers the center of gravity and improves the riding stability of your bike. In combination with TARA our LOGO models make the ultimate dream team for long-distance traveling. The LOGO also fits on particularly short frames. - Material: 25CrMo4 - Size: 26'' | 28' - Weight: 800g | 28.2 oz (26" | 28") - Loading Capacity: 26 kg | 57.3 lbs - Diameter: 10mm | 0.4 in
$200.00
The travel-master Logo has been updated with 3-D feet with perfect force absorption and an integrated screw attachment. The super-light mounting parts for mounting the stays to the frame and klick spring clamp as well. The Evo has the typical lower rail of the Logo classic, lowering the center of gravity and improving the riding stability. - Weight: 730g/1.6 pounds - Carrying Capacity: 40kg/88 pounds
Page 1 of 5 Next page