29-Inch
$1,002.00
Zipp's 3ZERO MOTO carbon 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheel and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective.
While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most.
At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain.
Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride.
- Higher impact resistance
- Reduced chance of pinch flatting
- More traction in rough corners
- Smoother ride in rocky terrain
- Ability to run lower tire pressure
- Reduced rider fatigue
- Frustration-free tire installation
- Rim is designed for compliance, creating the feel of extra suspension
- German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability
- Lifetime Warranty
$361.00 - $532.00
Just wide enough, just light enough. At 30mm internal rim width the M 1700 SPLINE 30 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest terrain. But with a high-end build, butted spokes, patented alloy Pro Lock nipples and the benchmark Ratchet System hubs, it still comes in at a low weight. Low weight means it's very reactive to rider input. Reactive means fun, and fun is why we are all doing this, right?
$611.00 - $809.00
When you head into trouble on the trail, be it up or down, the HX 1501 SPLINE ONE 30 will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength-to-weight and strength-to-width range, it works with many tire sizes and is the ideal choice for all E-MTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry-leading alloy rim and profile design, the HX 1501 SPLINE ONE 30 isn't a one-day wonder, but a trusty long-term partner.
$539.00 - $750.00
The Enduro incarnation of the SPLINE ONE line-up. Based on a rim that has survived top to bottom runs without a tire under world class riders such as Aaron Gwin, the EX 1501 SPLINE ONE 25 has nothing to prove when it comes to strength. For Enduro racers it comes in handy that it features tech details like the specially developed rim surface hardening process for increased durability at no additional weight. Being built of DT's highest-end components through and through, it should come as no surprise that Jared Graves and Richie Rude have been dominating the EWS on this exact wheelset.
$2,550.00
What It Is
The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface.
Who It's For
The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for…
Why We Made It
ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?"
Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.
$2,550.00
This wheel is the future of gravity riding and racing. It's ride-optimized, incredibly strong, and debuts the most effective and lightest anti-flat system on the market (ENVE's patent-pending Protective Rim Strip). These wheels will give downhill-oriented riders a new freedom to set their tire pressure for cornering and rock garden stability without sacrificing their confidence to smash track speeds.
Who It's For
Gravity junkies, Enduro racers, and hard-charging trail riders will find enlightenment riding the M7 Series. A completely new shape and design that massively reduces the risk of pinch flatting and/or damaging the carbon, the M7 Series provides the confidence to ride without limitations.
Why We Made It
Enduro runs on two things – Confidence and Control. Nothing ruins a good shred fest like a flat tire or broken rim, and nothing spooks you on a dusty trail like an unexpected drift. With this in mind, we have been hard at work over the past 2 years to develop a carbon wheel system that will allow ourselves, athletes, and most importantly – you – to go "full-send" without compromising the ride experience by running high tire pressures, DH tires, and heavy pinch flat reduction inserts.
Building upon the platform of the M7 Series' predecessor the M70, we re-profiled the rim to mate up with modern tires and to absorb trail vibrations and chatter. However, just fitting tires is not enough. We know that riders also want the freedom to run lower pressure and that doing so can introduce flat tires and damaged rims. The ENVE solution is a new rim shape paired with ENVE's patent-pending, energy-absorbing Protective Rim Strip. With this technology, riders can skip the inserts and run the tires and pressures they want. Amazingly, we've managed to keep the weight neutral and improve impact resistance too.
$2,550.00
What It Is
The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface.
Who It's For
The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for…
Why We Made It
ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?"
Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.
$1,080.00
The all-new M6 is ENVE’s flagship, every day, any-trail, wheel developed for all the bikes, riders, and trails between cross-country and gravity racing disciplines. Like all new M Series wheels, the M6’s rims feature unique shapes and constructions front and back. To accommodate the modern trail rider’s preference for 2.4-2.5” wide tires, the M6’s front rim features an internal rim width of 32mm, and the rear is 29mm.
- The front rim’s additional width and lighter construction maximize compliance, traction, and tire stability
- Wide Hookless Bead - Trail optimized anti-pinch flat protection
- Innerdrive hubs with CX Ray straight pull spokes
- Brass external nipples with Nyloc threaded locking insert
- Built for Cross-Country, Down-Country, Trail Applications
- Approved for E-bike usage - Up to 75nm
$352.90 - $379.90
Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel.
- Intended use = All-Mountain/Trail, Enduro and Freeride
- Tubeless ready, 30mm wide and light rim
- Straight-pull hubs/spokes built with a 3-cross pattern
- Includes Tubeless Valve and Tape
$225.00
Upgrading to a set of quality tubeless wheels is the number one way to improve the ride of your XC or Gravel bike. Tubeless offers more comfort and control with less rolling resistance, and when it comes to tubeless, nothing beats the easy inflation and performance of Stan's patented Bead Socket Technology. First introduced over 15 years ago, the original Crest rim design with BST helped launch the tubeless revolution. Today's Crest S2 wheels offer quick and easy inflation, the legendary airtight seal, and a 25mm width that offers incredible stability for 40mm to 2.3" Gravel and XC tires.
- 25mm rim width optimized for Gravel and XC tires up to 2.3"
- 6061 aluminum with sleeved joint and stainless steel rim eyelets
- Patented BST low-profile rim shape for easy tubeless inflation and the most reliable seal
- Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability
- E-sync hubs feature Enduro bearings with double-row freehub bearing and cromoly axle offer 47% increase in max torque capacity over Neo hubs
- Connection program includes 3-year E-sync hub warranty, 3-year S2 rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice
- Tubeless tape installed, requires additional valve stems
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles.
With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use.
“The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.”
Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch.
All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost.
The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes.
Flow S1 Wheelset
- Use: Aggressive Trail, All Mountain, Enduro, and Downhill
- Internal Rim Width: 29mm
- Optimal Tires Size: 2.35 to 2.8-inch
- Hubs: Stan’s Neo 32-hole Front, 32-hole Rear
- Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples
- Wheel Sizes and Weights: 27.5-inch (2,034g), and 29-inch (2,134g)
$345.00
- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits
- Tie beam triple-cavity rim design resists damage and prevents air loss under impacts
- 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires
- E-sync hubs
$279.99
- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes
- Black Ops MX1100 hubs with sealed bearings and laced with DT spokes
- 24mm inner rim width supports a variety of modern sizes
- OLD: Front: 100mm, Rear: 110mm
- Gears: Singlespeed freewheel
- Type: Tube only
- Size: 29-inch
$657.00 - $675.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 28mm internal width ideal for 2.2-2.5" tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$475.00
- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits
- Tie beam triple-cavity rim design resists damage and prevents air loss under impacts
- 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires
- E-sync hubs
Specs:
- Wheel Tire Type: Tubeless Ready
- Wheel-Brake Comp.: Disc IS 6-bolt
- Rim Material: Aluminum
- Spoke Type: Sapim D-Light
- Valve: Presta
- Rim Construction: Double wall
$308.00 - $320.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$359.00
Control and stability for enduro riding.
Details
- Wheels sold individually not in sets.
- Tuned Front and Rear Alloy Wheel System for enduro riding and racing.
- Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding.
- Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning.
- Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip.
- Welded and sleeved rim joint for additional strength.
$657.00 - $675.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$657.00 - $675.00
- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires
- Durable 6069 aluminum with welded joint and reinforced spoke bed
- BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build
- Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.
$225.00
Based on the legendary Flow rims that have won World Cup DH and Enduro World Series events, Flow S2 wheelsets are a great upgrade for riders looking for better tubeless performance and excellent durability. Patented Bead Socket Technology means easier tubeless inflation and more confidence on the trail. An emphasis on durability means a reinforced and eyeletted spoke bed, a quality sleeved joint, and 6061 alloy construction. A 30mm internal width makes the Flow S2 ideal for 2.3-2.6" tires.
- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires
- 6061 aluminum with sleeved joint and stainless steel rim eyelets
- Patented BST low-profile rim shape for easy tubeless inflation and the most reliable seal
- Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability
- E-sync hubs feature Enduro bearings with double-row freehub bearing and cromoly axle offer 47% increase in max torque capacity over Neo hubs
- Connection program includes a 3-year E-sync hub warranty, 3-year S2 rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice
- Tubeless tape installed, requires additional valve stems
$325.00
Based on the legendary Flow rims that have won World Cup DH and Enduro World Series events, Flow S2 wheelsets are a great upgrade for riders looking for better tubeless performance and excellent durability. Patented Bead Socket Technology means easier tubeless inflation and more confidence on the trail. An emphasis on durability means a reinforced and eyeletted spoke bed, a quality sleeved joint, and 6061 alloy construction. A 30mm internal width makes the Flow S2 ideal for 2.3-2.6" tires.
- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires
- 6061 aluminum with sleeved joint and stainless steel rim eyelets
- Patented BST low-profile rim shape for easy tubeless inflation and the most reliable seal
- Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability
- E-sync hubs offer fast 8.18 deg engagement with reinforced pawls
- Enduro bearings with double-row freehub bearing and cromoly axle offer 47% increase in max torque capacity over Neo hubs
- Connection program includes 3-year E-sync hub warranty, 3-year S2 rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice
- Tubeless tape installed, requires additional valve stems
$1,799.00 - $2,199.00
Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile.
- Designed for DH riding and racing
- Carbon fiber construction with 4mm asymmetric offset
- Reinforced rim bed for impact resistance
- Rated for e-bike use
- Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels
- Backed by a lifetime warranty
- Built with Industry Nine Hubs
$325.00
Arch S2 wheelsets have the versatility to handle a wide range of riding conditions and are the ideal upgrade for Trail, AM, Enduro, and eBikes. When your average ride includes both tough climbs and rough descents and you want the best tubeless system in the business, the Arch S2 is for you.
- Versatile 28mm internal rim width optimized for 2.2-2.5” tires
- 6061 aluminum with sleeved joint and stainless steel rim eyelets
- Patented BST low-profile rim shape for easy tubeless inflation and the most reliable seal
- Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability
- E-sync hubs offer fast 8.18 deg engagement with reinforced pawls
- Enduro bearings with double-row freehub bearing and cromoly axle offer 47% increase in max torque capacity over Neo hubs
- Connection program includes 3-year E-sync hub warranty, 3-year S2 rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice
- Tubeless tape installed, requires additional valve stems
$870.00
TR37 / Industry Nine Hydra wheels are the go-to choice for riders seeking top tier performance, with almost instant engagement. Known for being incredibly easy to service, Hydra hubs will offer years of reliable performance. When paired with TR37 rims, you end up with a wheel that’s ready to tackle anything from loose loamers to chunky backcountry epics. All NOBL wheels come pre-taped with valves and ready to go! Simply throw your tires on with sealant and you’re set!
- Designed and tested on the World Cup circuit, NOBL TR37 rims are right at home chasing podiums at your local enduro, or session laps after work
- Full carbon fiber design and construction
- I9 Hydra hub
- Includes pre-installed tubeless tape and NOBL alloy valve stem
$1,405.00 - $1,415.00
The Solix M UL250 is perfectly designed for riders that seek an aluminum performance XC wheelset. In terms of weight, engagement, and ride quality, Solix M UL250 leaves competition in the dust. Tipping the scales at an attractive 1425g, the UL250 leaves nothing to be desired when the course climbs, but rest assured the tubeless-ready 25mm inner width rim is eager to hit the huck lines when the track points back down. At the heart of the wheels are the Solix’s performance-driven feature set. Attack from the start with 605 points of terrain-taming engagement at your command and our all-new full bearing and freehub seal configuration ensures you’ll have more mud on your face than in your hubs.
- 5-Pawl Solix freehub body with 605 points of engagement. This patent-protected freehub technology offers unrivaled .59° engagement for the Solix family of wheels
- High quality aluminum alloy rim with weatherproof sublimated graphics, tubeless friendly bead shelf, and a proprietary profile to keep dents at bay
- Straight pull, integrated nipple, one-piece aluminum spokes that thread directly into the hubshell resulting in a solid, flex-free junction. No special tools or service procedures required
- Combining the immediate response of the Solix freehub with this evolutionary hub and spoke chassis gives the rider a system that can challenge carbon rim wheelsets for ride quality and durability
- 2-Year Warranty coverage against defects
$725.00
Silent, stealthy and quick engaging. The TR37 / Onyx Vesper wheels are perfectly suited for riders that navigate towards trail riding. Featuring Onyx’s revolutionary sprag clutch, the fastest rolling hub on the market, with a completely silent freehub when coasting, and engages instantly when you drop the hammer. All NOBL wheelsets come taped with valves and ready to go! Simply throw your tires on with sealant and you’re set!
- Full carbon fiber design and construction
- Onyx Vesper Hub
- Includes pre-installed tubeless tape and NOBL alloy valve stem
$349.99
Give 'em your worst
Aggressive with a downright surly attitude, the new Aeffect R wheelset was built to provide you with category-leading Trail to Enduro good times with a 30mm-wide, offset 6069 alloy rim and new Trace hub to make for an unstoppable combo of toughness and durability.
Rough And Rowdy
Made to handle all kinds of Enduro and all-mountain punishment, the burly Aeffect R rim sports a 30mm inner width and is born tubeless ready.
Balance is Key
Aeffect R sports a stout, 6069 alloy rim with a 4.5mm-offset spoke bed to provide spoke tension balance, increasing wheel stiffness and overall fatigue life.
No Frills, All Thrills
The new Trace hub doesn't need flash or gimmicks. Highlights include: durable cartridge bearings, no-nonsense 10-degree engagement, a tough steel axle, and all relevant cassette body options. This hub will get the job done, ride after ride.
$975.90
EXC 1501 SPLINE ONE combines everything a modern enduro rider wants in a wheel. The 30 mm wide carbon rim gives you the precision to stay on track even on the trickiest lines while a 240 hub keeps it spinning. Both components are held together by performance weight optimized competition race straightpull spokes.
- Designed for Enduro applications
- Carbon rim with 30mm internal width
- 240 hub
- Competition race spokes and Squorx nipples
$450.00
The 350/XM421 front wheel features a DT350 straight pull, front boost Center-Lock disc hub, built with Champion spokes to a 28 hole 29" DT XM421 rim.
$426.90
EX 1700 SPLINE wheels feature a super strong and welded 30 mm wide aluminum rim with a profile design made to withstand the hardest use of Enduro racing, while still keeping the weight low for long and demanding uphills. Laced to double butted competition straightpull spokes, the EX 1700 SPLINE wheels are built to take a beating.
- Welded Aluminum rim with 30mm internal width
- 350 hub with 36 point SL Ratchet system
- Competition spokes and Squorx nipples
- Designed for Enduro applications
Page 1 of 5
Next page