Shop Parts & Accessories

Our bit holder has been quite the hit with customers so we have started offering them as a stand alone part or with a set of bits. The bit holder is a machined aluminum part with a strong magnet in the base. The holder will retain the individual bits as well as affix the holder to a steel object. Holder made in Bend Oregon.

An elegant solution to protect your cranks and to add some style at the same time. Available in several colours. Compatible with: SRAM XX1 Eagle, SRAM XX1, SRAM X01 Eagle, SRAM X01, TRUVATIV Descendant Carbon, Pinion cranks, Praxis Cadet, Race Face Respond, Shimano XT, Shimano SLX, TRUVATIV Descendant Aluminum.

Get rid of frame chips and cable wear on the frame. - Don't ruin the look of your bike. Improve it. - Super easy to install, even on the most difficult curves. Fool proof. - Will last longer than your bike. - Designed for universal fitting. - CLEAR version is perfect for protecting new frames or for protection without visual impact. - This option is ideal for Trail, All Mountain, Enduro, Freeride and DH bikes.

Protects you from mud and water spray and fork seals from dust, mud, and debris.

These reducers allow the use of handlebars with 31.8mm clamp diameter in our Barkeeper stem (which is normally designed for 35mm handlebars). - 19g /pair - Barkeeper stem purchased seperately ATTENTION: The sleeves were specifically designed for the BikeYoke Barkeeper stem. Other stems were not checked for compatibilty.

Mount your SRAM Pod Controller directly to your brake levers for a perfect ergonomic position and a clean look on your cockpit. The Poddy can be fitted to any brake lever that features a SRAM Matchmaker (MMX) interface, which is offered as an adapter by most brake manufacturers: Bikeyoke/Shimano, Trickstuff, Hope, Magura, Formula, to name but a few.

The new REVIVE 3.0 is the latest evolution of our flagship model, benefiting from a successful 10 years of experience. We didn't change anything proven, and so the famed reliable and buttery smooth hydraulic system was not touched, yet we have succeeded in making our multiple award-winning post even better. Highlights of REVIVE 3.0 include: - new saddle clamps for a 5mm lower stack height - a new 360° rotatable foot unit shortens the overall seatpost length by an extra 10mm (213mm posts are now 566mm long) - new slide-on cable barrel - new BikeYoke cables (3mm housing + 0.9mm polished and coated stainless wire) - travel reduction in 5mm increments (x4, 5mm spacers included) - 3D-forged, one-piece upper tube - redesigned actuation linkage - two-piece saddle bolts with integrated conical washers - still fully user serviceable - 650g Sold as seatpost only - Remote/Trigger's are sold separately.

An extremely nice looking full aluminum headset topcap made in one piece. Laser engraved and then black anodized for a classy black in black matte/shiny finish. - Weight: Feathery 5g

This BikeYoke allows the use of a standard shock in your Specialized bike. Epic 2018-2020 Includes: - 1x BikeYoke EP02 - 1x DU bushing - 1x reducer - 1x stainless steel bolt

Named after Tasmania’s highest peak, the Burgh Ossa Bar Tape blends functionality and style with a topographic map pattern and a few signature X’s. Whether you’re taking on the hard stuff or cruising around town, this tape has got your back and hands. Tape Weight: Combined Weight 65g / Single Roll 32.5g Dimensions: 200cm (L) x 3cm (W), 2.5mm thickness, tapering to 1.8mm at edges Base Tape: Black Print: Black/Gloss Includes: 2x End Plugs, 2x Finishing Tape Strips

Burgh's Pixel Bar Tape is a throwback to the dawn of the 8-bit video game. Enter the 1970's and Pong, one of the earliest and most popular 2D video games was let loose into mainstream culture via Arcade Machines thanks to Atari. Since then, technology and games have advanced hand in hand throughout the 21st century, with virtual reality now coming to fruition. - Tape Weight: Combined Weight 65g / Single Roll 32.5g - Dimensions: 200cm (L) x 3cm (W), 2.5mm thickness, tapering to 1.8mm at edges - Includes: 2x End Plugs, 2x Finishing Tape Strips

This tape is for those that love being flamboyant in a stealthy way, or those looking for the time-tested classy nature of white on black, as well as repetition, pattern, and structure. - Tape Weight: Combined Weight 65g / Single Roll 32.5g - Dimensions: 200cm (L) x 3cm (W), 2.5mm thickness, tapering to 1.8mm at edges - Includes: 2x End Plugs, 2x Finishing Tape Strips

Designed to simplify thousands of hangers into one universal design that can be easily stocked by your local bike shop. Our hanger is uniquely forged and fully machined from aluminium giving you the toughest hanger possible. We always recommend having a spare to be sure of no missed rides. - Compatible with all frames designed to accept the SRAM UDH - Compatible with all MTB and E-MTB drivetrains - Forged and Fully Machined from 7075 Aluminium - Supplied with Mounting Screw and Washer - Thru Axle Pitch M12 x 1.0 Manufacturer’s part number: AC-DRHG-MTB-A7

These super tough axles are constructed to Fox's exact specifications and made from 7075 Aluminium. Unlike any other fork axles on the market, these feature a unique double hex design. This includes the traditional 6mm that everyone is familiar with but with an added 8mm Allen key fitting as well. This feature makes removal much easier if the 6mm gets chewed up, over tightened or not removed for a long time. Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel is correctly tightened. This Axle also comes with a grade 5 titanium pinch bolt and backing nut to finish things off. Clean, simple, and fast! Replacement for Fox PN: 820-09-071-KIT / Service Set: 2021 36-38 15x110 KaboltX Pinch-axle Assembly 820-09-063-KIT / Service Set: 2020 FOX-Marzocchi 15x110 QR Adjust Axle Assembly NOTE: This axle does not fit 2021+ 32 and 34. (Square Arch)

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. They feature "a get out of jail" 6mm Allen key on the drive side of the axle if you manage to round the non-drive side. - Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. Fits Yeti Bikes: - 160E - Arc - SB120 - SB140 MY23+ - SB160 Note: Original part for SB120, SB140 MY23+, SB160 is 172mm length, the 174mm axle is still compatible.

"Make a grip with the fussiest rider on the planet, you must be mad!!" The Bartender Pro is the next level in grip design for Burgtec. We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening. - 31.5mm Diameter. - 30A Rubber Compound - Single Lock On

"Make a grip with the fussiest rider on the planet, you must be mad!!" The Bartender Pro is the next level in grip design for Burgtec. We’ve collaborated with 3 x World Champion Greg Minnaar to hone the construction of this grip to produce unrivalled vibration dampening. - 31.5mm Diameter. - 30A Rubber Compound - Single Lock On - Tapered Core

When you’ve got to finish your bike off right. The Burgtec Top Cap, Top Cap Bolt and Stem Spacers are the perfect finishing kit. Mix and Match to suit your bike. ***Top Cap only works with Burgtec Top Cap Bolt***

NOTE: The crank spindle length, must be long enough to allow for proper crank arm installation. - This BB includes x2, DRF3041 bearings, plus the necessary spacers and washers - Adapts cranksets with 30mm spindle, to fit BB86/BB92 frames (with 41mm ID press-fit BB shell) - Bearing OD is stepped (a 44mm lip interfaces with BB shell face) - Double row deep groove radial, with 440C Stainless Steel balls and races (ABEC-3 precision) - Provides maximum corrosion resistance in applications and environments where critical - Filled with Marine High Pressure grease - 80g

Stainless steel crown race - Fits 1.5" straight steerer - H6049 (NO.12B-6)

Miscellaneous replacement small parts for Hayes hydraulic disc brake systems. - Includes piston and seal

Hope Technology adds to their chainring offering with the R22. A new chainring specifically designed to be compatible with all new drivetrain systems The R22 features a new tooth profile to work with all major drivetrain types along with updated spider designs, and compatibility with 9/10/11 and 12 Speed drivetrains including SRAM T-Type and Shimano HG+. Key Features: // Asymmetric tooth profile engineered for cross compatibility and functionality with different drivetrain systems // 9/10/11 and 12 Speed compatible (including SRAM T-Type and Shimano HG+) // Improved mud shedding capability // Improved chain retention // Better performance with extreme chain angles on modern 1 x drivetrains // Tooth profile allows for more chain wear before function is compromised, extending service life // Spiderless rings have a new leg design with improved strength and stiffness // Machined from 7075-T6 aluminium // 28T to 36T size range // Available in Black, Silver, Blue, Red, Orange and Purple

- CNC Machined Aluminum - Combo Compatible (580 Add-On sold separately) - WAHOO approved replaceable computer insert protects computer tabs - Anodized Black with laser etched logos - Payload Capacity: Top - 123g / Bottom 242g - Weight: 63g - Mount Type: Clamp 31.8mm - Mount Weight: 53g Compatibly: - All Wahoo Cycling Computers- ROAM, BOLT, ELEMNT, MINI - Combo (GoPro-style light/camera interface) K13-4500-31.8-BLK

Thanks to the innovative formula of KMC GO CHAIN WAX, the premium KMC chains treated with our wax offer next to high efficiency an unrivalled durability. Compared to oil-based lubricants, waxed chains are less susceptible to dirt build-up, increasing drivetrain life and reducing cleaning intervals. - Compatible with all 11-speed derailleur systems - Waxed with KMC GO - Slotted inner- and outer plates and hollow pins - Perfect shifting thanks to Double X-Bridge - Includes a MissingLink - Size: 1/2" X 11/128" - Pin length: 5.65 mm - Weight per 110 links: 244 g - Length: 118 links

- Creates a dry ceramic coating for increased durability and performance in dry condition - Excels in dry and dusty conditions - Biodegradable - Integral UV tracer dye and UV torch to aid accurate application and ensure total protection

NEW: Please refer to our chart for the correct adapter size you need. Disc brake adaptors available for Shimano, SRAM, Hope, Hayes, Formula, etc. rotors: CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal for front and rear brakes. Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size. If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4, etc.), please also order a low profile (button head) bolt kit to ensure correct fitment. Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available. Not currently compatible with TRP 203mm rotors.

The Back-Roller Core is the solid base bag among the Back-Rollers and yet 100% waterproof. With its robust polyester fabric, it's not only suitable for extended bike tours but also ideal for daily urban commutes. With the Back-Roller Core, you're always ready to transport important items dry and securely – whether it's on your way to work, shopping, or other urban adventures. A reliable companion that withstands the elements and simplifies your everyday life. If the basic functions of the Back-Roller Core are ever insufficient, this practical bag can be expanded with various optional accessories. The Carrying System Bike Pannier helps carry the Back-Roller Core on your back, various inserts provide stability to the bag body off the bike, or offer better organization inside the rear bike bag. FURTHER PRACTICAL DETAILS - High-visibility reflectors on the outside of the bag.

The Sport-Roller Core as a single bag is an excellent choice for city cyclists looking for a cost-effective entry into biking without compromising on quality or sustainability. Whether on the front or rear luggage carrier, this practical bicycle bag effortlessly transports everything you need in the city. A trip to the countryside, a visit to the gym, or a small shopping spree, are easily possible in any weather, as the minimalist bag is 100% waterproof. In addition, the bags are equipped with high-visibility reflectors made of 3M Scotchlite reflective material on the sides of the bag to increase road safety. Due to its size, the Back-Roller Core is also suitable as a bicycle bag for children’s and youth bikes. FURTHER PRACTICAL DETAILS - Optional shoulder carrying strap E172 available - Can also be worn as a backpack with the optional Carrying System for Panniers

Scratch Cover is the only DIY kit that allows you to remove any scratch on any stanchion: fork, air shock or dropper post. Developed specifically by SENDHIT for mountain biking, the Scratch Cover fork stanchion scratch repair kit restores the fork stanchion’s smooth appearance and keeps your suspension working properly. Every kit includes everything for 5 repairs: - 1 file to remove the burr - 5 ml bottle of resin and 3 ml bottle of hardener - 5 mixer tubes - 5 pipettes - 5 cleaning wipes - 1 sanding wedge - 10 sandpaper tabs - 1 pair of gloves - 1 polishing paste Please see the instructions or the Sendhit website for details on application: https://www.sendhit.net/products/scratch-cover

We wanted to make Kyle the grip of his dreams sparing no expense in modern science. By combining our thinnest interior sleeve with an oversized diameter, we achieved a grip that not only dampens small bumps but provides superior grip. Using the softest rubber ever used by our American factory has allowed for supple grips, while maintaining a quality that outlasts the competition. With a need for oversized grips in every discipline, from XC Foamiez, to DH Double-Wrapped, this was a no brainer. - Oversized 5” (134mm) Grip Area - Oversized 6” (151mm) Overall Length - Oversized 1.35” (35mm) Diameter - Semi Flange with Pinky Ramp - Single Lock - Integrated End Cap - Hand Crafted in California