Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Stems

ENVE Aero Road Stem
$300.00
An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world. This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise. - Material: Carbon - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 42.5mm with length shim / 45.5mm with angle shim - Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm - Torque Spec, Steer Tube: 5.5Nm
Dimension 25.4mm Threadless Stem
$29.99 - $32.99
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g
Dimension Trail Stem 31.8
$30.00
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
Easton EA50 Stem
$39.99
With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.
3T Apto Team Stealth
$110.00
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts (Titanium in case of the TEAM version) securely hold the stem in place.
Renthal Apex Stem
$99.95
- CNC machined 2014 aluminum body and 7075 aluminum clamps - 240 degree wrap-around, twin plate clamping system - External webbing to maximize structural strength - 118-158g including stainless steel bolts
Odyssey DGN Stem
$64.99 - $74.99
Using Odyssey's popular TL48 stem as a springboard, Tom Dugan's signature DGN stem is a classic top load design. FEATURES - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter) - 6061-T6 aluminum, CNC machined
Sunlite Alloy Cruiser Quill Stem
$17.99
• Aluminum head • Stainless-steel 180mm-tall shaft • 1-inch model has 22.2mm quill, 15/16-inch model has 21.1mm quill • Single-bolt clamp
Ritchey WCS C260 Stem
$99.95
Ritchey's WCS C260 stem starts with a bar clamp that wraps a full 260 degrees around the handlebar to distribute clamping stress more evenly through the handlebar, faceplate, hardware, and stem body. The steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube. The body is 3D-forged from an advanced 7050 aluminum and internally machined for further weight reduction. Premium quality chromoly steel bolts are used throughout, but in a smaller T-20 Torx size that shaves a few more grams with no sacrifice in strength or rigidity. - Stack Height: 42mm - Faceplate width: 36mm - Weight: 103g (100mm)
Sunlite TCO Piston 2 Bolt-Clamp Quill Stem
$15.00
• Forged aluminum • 2-bolt clamp • 250mm tall (extra tall)
FSA OS-99 CSI Stem
$189.99
FSA's K-Force OS-99 CSI is 3-D forged and CNC machined from AL2014 before a uni-directional (UD) carbon weave skin is applied through the Carbon Structural Integration (CSI) process. To further reduce weight the OS-99 uses a 4-bolt sculpted AL2014 alloy/carbon faceplate and titanium hardware. CSI is a process that permanently bonds carbon to alloy, to create a true hybrid product, with many of the benefits of aluminum and carbon. - Stack Height: 41mm - Weight: 126g (100mm)
Sunlite Alloy 1-Bolt Quill Stem
$15.99 - $16.99
• Forged aluminum • Single-bolt clamp • 180mm tall
Origin8 Classique Sport MTB Stem
$23.99
Origin-8's Classique Sport ATB Stem is crafted from light and durable forged aluminum. It features a 2-bolt handlebar face clamp for easy bar installation and removal. And it even has a built-in brake cable stop. This stem is 180mm tall from the bottom to top of the quill bolt so that you can raise and lower your bars (the bolt is hidden inside the vertical part of the stem). This is a nice choice for that classic mountain or touring bike.
Odyssey BOSS Stem
$64.99 - $74.99
Using Odyssey's popular TL48 stem as a springboard, Aaron Ross’ signature BOSS stem is a classic top load design with 52mm of reach and a 35mm rise. FEATURES - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter) - 6061-T6 aluminum, CNC machined SPECS - 52mm reach - 35mm rise - 11 oz
Syntace Force 109
$99.00
From road to mountain, Syntace's Force 109 stem offers a variety of lengths in a 6° rise with thoughtfully engineered features. It's oversized stem tube diameter offers increased stiffness, and titanium bolts shed unecessary weight. A 200 degree clamp face helps increase handlebar strength and fatigue life. - Stack height: 38.5mm - Weight: 118g (110mm)
TruVativ Stylo T20 Stem
$40.00
TruVativ's Stylo T20 stem is 3D forged for that perfect balance of light weight, stiffness and control on the trail. Four bolts securely attach the face plate and make changing out handlebars a breeze.
Kalloy Uno 822 Adjustable Quill Stem
$23.99
Kalloy's 822 Adjustable Stem lets you set up your handlebars exactly where you want them using just an allen wrench! With a 0-60° rise, you're sure to find a position that puts you comfortably in control. Its 4-bolt handlebar clamp makes bar changes easy and secure. - For quill-style steerers
Spank Spoon 2 Stem
$39.90
- Unique style, modern geometry, and rock solid construction, without the heavy price tag - Suitable for all disciplines: Freeride, All Mountain, Enduro - Chamfered bar-clamps to reduce stress risers and increase fatigue life in handlebars - Ideal for shorter riders to improve the setup of their cockpit. - Length (mm): 40 - Rise: 0° - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): ±170 - Finish: Shot peen anodized, laser logos
Whisky Parts Co. No. 7 Stem
$40.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
Race Face Respond
$49.99
RaceFace designed their Respond stem for DH/AM riders seeking big hit performance at an All Mountain weight and beer budget cost. It's engineered to offer an optimal combination of strength, stiffness, and weight. - Forged & blasted 6061 aluminum for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates 'stress risers' which could cause your bar to bend or break
ENVE Road Stem
$265.00
The ENVE Road Stem is a staple component in our line and often under-appreciated for the benefits it provides out on the road. The stem plays a key role by connecting your bike to your handlebars and it must manage all the forces that you put into your bike. On the road, the 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff to ensure that inputs into steering and accelerating are positive and confidence-inspiring. Over rough roads, the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue. To further reduce weight, all stem hardware is constructed from lightweight titanium. The faceplate is cold-forged aluminum that allows for a highly reliable and strong grip on the handlebar for responsive steering input with zero slipping. - Material: Carbon Fiber - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 41mm - Torque Spec, Face Plate: 5.5Nm - Torque Spec, Steer Tube: 5.5Nm - Weight: 90g (80mm), 107g (90mm), 115g (100mm), 121g (110mm), 126g (120mm), 136g (130mm), 145g (140mm)
Ritchey Comp 4-Axis 30D Stem
$39.95
Pro caliber features at a real-world racer price. This 3D net forged 6061 aluminum stem offers +/- 30 degrees of stem angle for riders wanting a more comfortable fit. The angled steer tube clamp slot reduces stress on carbon steer tubes. - Material: 3D net forged 6061 - Angle: +/-30 degree - Steerer Height: 45mm - Steerer: 1-1/8” - Faceplate Width: 40mm - BB black finish - 170g (110mm)
Answer Products XCM Stem
$79.99
- 3D Forged stem body and face straps create extremely strong and lightweight stem - Opposed clamp bolts compatible with carbon steer tubes. - 31.8mm diameter bars only - 90mm length - 6-degree - All stems come with 3,5mm spacers, top cap and star nut
Chromag Director Stem
$121.00
Chromag's direct mount Director stem sets the standard for exquisite machining detail. Light weight and solid, with a wide clamping stance, the three piece design weighs in at a slim 150 grams. - Boxxer / Fox / 888 direct mount system - 3D profile machining - 50mm wide clamping stance - 47mm extension - Low rise (-5mm) - 31.8 (Oversize) bar clamp
Sunlite Adjustable Quill Stem
$23.99
• Forged aluminum • 2-bolt clamp • 180mm tall
Chromag BZA Direct
$147.00
Chromag's freshly carved 35mm clamp direct mount BZA stem sets a new standard for exquisite machining detail. Lightweight and solid, with a wide clamping stance, the three-piece design weighs in at a slim 160 grams. Chromag's direct mount stems feature a one-piece main body for consistent placement and overall stiffness. - Boxxer / Fox / 888 direct mount system - 85mm wide clamping stance - Laterally stiff one-piece main body
3T Apto Pro
$70.00
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts securely hold the stem in place.
Zipp Service Course SL-OS Stem
$132.00
Zipp's Service Course SL-OS Stem provides lightweight strength and versatility to help you achieve the perfect riding position. At only 140 grams, the Service Course keeps your rig light while maintaining toughness for the long haul. Change the angle of the stem quickly and easily with the included shim that lets you tailor your comfort even more. And, the Service Course works with both 1 1/8-inch steerers and 1 1/4-inch. • Included shims allow the stem's rise to be adjusted to 4°, 6°, or 8° angles.
WeThePeople Hydra Stem
$59.99
Named after the multiple headed serpent from Greek mythology, the Hydra stem really is a beast of many heads. Available in three rise options and utilizing shark tooth clamping inside the stem body to provide a vice like grip, the Hydra is one stem that won't be letting your bars slip any time soon. - Available in 22.2mm and oversized 25.4mm clamp options - Material: 6061-T6 alloy, fully CNC machined - Wider 48mm faceplate for extra grip Please Note: The 25.4mm Hydra stem is only compatible with 25.4mm bore handlebars, including the 25.4mm WTP BUCK and Mad Max bars.
Ritchey SuperLogic C-260 Carbon Stem
$269.95
When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.
Spank Spike 25/30 Direct Mount Stem
$75.90
Adjustable in both reach and rise, Spank's Spike 25/30 DM Stem allows the rider to find the ideal stance and balance point. 2D forged for strength, and CNC optimized to just 135g, this unique direct mount also features chamfered barclamp zones to reduce stress risers and improve fatigue life in any handlebars. As DH frames have gotten longer, shorter and more adjustable, direct mount cockpit designs have become a necessity. Developed with the World's Top DH pros, the Spike 25/30 DM Stem takes DH cockpit tuning to a new level. It's remarkably short reach was accomplished first by SPANK, by bringing the lockdown hardware into the barclamp, while maintaining the ease of set-up and resistance to moving under impact. - CNC machined 7075-T6 aluminum - Rise-adjustable: 28-33mm - Reach-adjustable: 25/30mm - Fits 2005-current BoXXer, Fox 40, Dorado, and 2012-current 888 forks
3T Integra LTD (-10-degrees)
$349.99
3T's Integra LTD stem is the perfect solution for any Garmin Edge owner. A Garmin-specific mount is built into this stiff, streamlined stem to keep your cockpit tidy and aero. The Integra's carbon construction keeps it rigid and light for sprints and climbs alike. If you're not riding with your Garmin, or if you don't even own one, the Integra can be fitted with its front end plate for an even more aerodynamic look.
Race Face Chester Stem
$54.99
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates ‘stress risers'
3T Arx LTD
$335.00
Arx, Latin for stronghold and bridge, is 3T’s race-proven design for the perfect connection between fork and handlebar and suited to all cycling disciplines. Clamp design is optimized to ensure a secure fit on composite steerers and bars without the need for potentially damaging high torque values during assembly. 3T inhouse tests show Arx’s clamp by far exceeds the CEN standard, and also that it works very well with other brands of handlebar. Arx Ltd is the carbon-fiber version of the stem, with Ti bolts. Super-light and super-stiff, it is a highly evolved, modern design weighing just 118g.
Thomson BMX Stem
$99.95
BMX riders need tough components, which is why Thomson developed their BMX Stem. It can handle whatever you can dish out thanks to being constructed from a solid bar of 7000-series aluminum. Plus it's anodized to prevent corrosion and has tough heat-treated bolts. You'll also appreciate the 50mm-wide clamp for a super-secure handlebar and enhanced control, while Thomson's patented undercut around the bars provides even more stability. And, if you run a Gyro, Thomson's got you covered, too, thanks to the built-in spacer that eliminates the need for a separate, loose spacer. And, at only 255 grams, the BMX stem keeps your rig light for the toughest tricks and longest rail rides.
Spank Spank Split Stem
$89.90
- Highly weight optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars - Human Factor Design features micro increment size options, tuned to fit any rider size and style - Human Factor cockpit setup index facilitates tuning of upsweep and backsweep - Ultra-short stack height and true zero degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness - Shot peen-anodized surface increases strength, durability, and fatigue life
Dimension 31.8mm Threadless Stem
$29.99 - $34.99
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
Sunday Freeze Topload Stem
$29.99
Sunday’s Freeze Topload Stem uses a die-cast aluminum body with forged 6061-T6 aluminum face plate rocking an embossed Sunday logo. It has recessed sides and bottom section to reduce weight without losing an ounce of strength. With their careful material and design choices, Sunday is able to offer the same stem used by the Sunday team at a very affordable price. - Reach: 52mm - Stack Height: 33mm - Rise: 34mm (1mm drop when inverted) - Clamp Bolts: M6 x 1.25mm pitch (x4) - Pinch Bolts: M6 x 1.25mm pitch (x2) - Weight: 10.5 oz
TruVativ AKA Stem
$47.00 - $53.00
TruVativ's AKA Stem is 3D forged from 7050 aluminum for durable strength in all conditions. Four bolts attach the faceplate for a vise-like grip on your bars, and the 2-bolt clamp secures to your steerer for pinpoint steering precision and stiffness. This stem perfectly balances weight and strength for your trail or all mountain bike.
FSA Energy Stem
$113.99
At just 113g for a 100mm extension, the Energy stem represents cutting-edge aluminum construction. The shape is 3D forged from 2014-aluminum for great strength, with the final refinements carried out by CNC machining. Chromoly bolts complete the package.
Spank Spike Director 2 Stem
$49.90
- Proven alloy strength and security for racing or freeriding - 2D forged alloy body and wide, chamfered bar-clamps offer unparalleled support to handlebars, enhancing safety and longevity in your DH cockpit - Shot peened and anodized for high strength and low weight - CNC weight optimized for 31.8 bars - Key Technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy, CNC Weight Optimized - Length: (mm) 50 - Rise: (°) 15 - Diameter (mm): 31.8 - Stack Height (mm): N/A - Weight (g): ±150 - Finish: Shotpeen anodized, laser logos
WeThePeople Hydra Stem
$60.99 - $75.99
Named after the multi-headed serpent from Greek mythology, the WeThePeople Hydra stem really is a beast of many heads. It's available in two rise and two clamping options, and utilizes shark tooth clamping inside the stem body to provide a vise-like grip. The hydra is one stem that won't let your bars slip any time soon. The hydra is one of the first stems on the market to be available in the 25.4mm oversize clamp option. Pair it up with any of our 25.4mm handlebars to have a truly indestructible front-end setup.
3T Arx II Pro
$70.00
3T's Arx II is a subtle refresh of the well-liked Arx alloy stem, which has found a place on every sort of bicycle since its launch in 2007. The faceplate is drawn in tighter at top and bottom for a more ovalized frontal appearance, while retaining the cutout 3T logo. The sides of the extension are slightly flattened for a more sculpted look by comparison with the tubular section of the first-generation Arx. A single M7 bolt clamps the stem to the fork steerer, instead of the twin M5 bolts previously used, and the Allen bolts used on the original Arx have been replaced by no-strip Torx bolts. - Stack height: 40mm - Weight: 135g (110mm)
Ritchey WCS C220 73D Stem
$89.95
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 73D Stem offers 17-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 73/17 degree - Stack: 45mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
ENVE M6 Mountain Stem 31.8mm
$280.00
A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars. - Material: Carbon - Faceplate material: Aluminum - Hardware material: Titanium - Clamp Diameter: 31.8mm - Steerer Clamp Diameter: 1-1/8-inch - Torque Spec: 5.5Nm - Weight: 85g (40mm), 92g (55mm), 99g (70mm), 104g (85mm)
Radio Axis Stem
$59.99
Based on our famous Crystal stem, the Radio Axis stem is CNC machined out of the highest quality 6061-T6 alloy, lifts your bars nice and high, and prevents them from slipping due to our wider 48mm clamping area and the larger head 6mm bolts. The choice of most of our team, this beauty now comes in a wild Sandblasted Purple finish.
Dimension Trail Stem 35.0
$35.00
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
Origin8 Flow MTB/Road Stem
$34.99
3-D forged AL6061-T6 alloy construction - 40mm stack height - 4 bolt front loading faceplate design
Evo E-Tec OS
$29.99
- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 31.8mm handlebar clamp - Heat treated hardware - Weight: 152g (100mm)
Evo E-Tec Stem
$29.99
- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 25.4mm handlebar clamp - M6 Black hardware - Weight: 161g (110mm)
Renthal Integra 35
$109.95
- CNC machined 6082 aluminum body - 7075 aluminum clamps - Unique 240-deg C-shape clamps - Minimal 6-bolt design - U-shape cradle clamp eliminates handlebar stress raisers found with traditional stems - Ultra-wide 64mm clamp width
Ritchey WCS Carbon Solostreem Handlebar/Stem
$499.95
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)
Whisky Parts Co. No. 7 Mountain Stem
$40.00 - $45.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components. - Bead-blasted, then anodized, finish - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation
TruVativ Hussefelt Stem
$30.00 - $40.00
TruVativ's Hussefelt is an aggressive DH/freeride stem forged from 6061 aluminum for superb stiffness and superior strength. The short length provides supreme confidence when railing down the sketchiest steeps. Four bolts attach the faceplate for a vise-like grip on your bars, and the 2-bolt clamp secures to your steerer for pinpoint steering precision and stiffness.
TruVativ Holzfeller Stem
$64.00 - $66.00
Whether you’re trying to hold your line on a jackhammer descent or stick a landing on a 20-foot gap jump, you need confidence and control. The heart of the beefy HOLZFELLER Stem is its 6066 aluminum body, 3D forged into a thing of beauty with all-new graphics. It takes design cues from the lighter AKA Stem, but has added strength for the most extreme DH and Freeride situations. The HOLZFELLER features a 2-bolt steerer clamp and 4-bolt handlebar clamp and weighs less than 200g (190g for a 40mm length). It’s available in two color choices and three lengths: 40mm, 55mm or 60mm. HOLZFELLER Stem is also available with a larger 1.5-inch steerer tube diameter.
TruVativ Holzfeller Direct Mount Stem
$90.00
Steep descents, nasty rock gardens and high speed: all in a day's work for TruVativ's burly Holzfeller Stem. Made from oversize 3D forged aluminum for serious strength, the Holzfeller thrives on gravity-fueled abuse. The short length provides supreme confidence when railing down the sketchiest steeps. Four bolts attach the faceplate for a vise-like grip on your bars, and the direct BoXXer mounting delivers pinpoint steering precision and stiffness.
TruVativ Descendant 35mm Stem
$65.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Perfect match with Descendant handlebars - 3D forged 7075 - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
Pro Koryak Stem Di2
$79.99
The Koryak Di2 stem is ideal for AM, Trail, and XC. It's 3D forged with AL-7075 aluminum for a strong and lightweight stem, and has a headlock system for a secure front clamp fixation. The Koryak stem is ready to hit the trail.
Pro PLT Stem
$59.99
- 3D forged AL-2014 construction - Sizes: 50 - 130mm, 10 deg. angle - Suitable for 1-1/8" forks - Diameter handlebar clamp: 31.8mm - Headlock system for a secure front clamp fixation
Pro Vibe Stem
$129.99
Some might call it magic—PRO likes to refer to it as co-creation: aligning all forces to work in favor of you. The PRO Vibe Stem is designed to align your cockpit perfectly with your bike for an optimal riding position. Supreme stiffness offers you more control during those high-speed descents or maneuvers. It's also developed for ultimate integration with Di2 to give you maximum aerodynamic performance and ultra-clean styling. With the specially positioned cable ports, you can internally route Shimano Di2 cables. All of the advantages of Di2, with none of the cables showing. Align yourself with performance—use the PRO Vibe Stem. - Anodized AL-7075 - Shimano DI2 integration - Lightweight titanium bolts - Integrated topcap