Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

$81.00
The Atmos 7k stem is a lightweight performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, all fasteners are adjustable via a T25 tool for easy, quick adjustments. The Atmos 7k also features an integrated GoPro mount. - ±6° angle - Integrated GoPro mount - T25 fasteners for 1 tool across the cockpit SPECIFICATIONS - Stem Angle/Rise: 6 degrees - Clamp diameter: 31.8mm - Steerer clamp diameter: 1-1/8 in - Hardware: Steel
$81.00
Built strong to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Direct mount stem gives DH riders lower more aggressive position - Super-stiff, stable front-end handling - Lightweight - Two-piece design - Designed to pair with BoXXer fork
$81.00
It’s low-slung, stiff, aggressive and serves up support and control the way a direct mount stem should. The Descendant direct mount stem may have been designed to attack the race clock, but it was built tough, to take on whatever comes next. No matter where you take it, this Descendant stem will keep you pointed where you want to go. - Pair with BoXXer fork - Gives DH riders lower more aggressive position - Super-stiff, stable front-end handling - Lightweight - Two-piece design
$79.95
You really can have it all; Ritchey's WCS C-220 stem features revolutionary stiffness and classically inspired good looks, but it’s quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3d forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Silver Finish - 121g (110mm)
$79.95
You really can have it all. The sexy silver WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey trail stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Stack: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - HP silver finish - 121g (110mm)
$79.95
The new Ritchey Classic Toyon stem takes its lead from the original, award-winning Ritchey C220 and gives it a more modern shape, a timeless aesthetic and increased stiffness for improved handling and greater responsiveness. Available exclusively in a 60mm length, the Classic Toyon is the perfect match for the Classic Kyote with its extended backward sweep. The Classic Toyon retains the clamping surface area of the C220, which creates a more secure interface by wrapping a full 220° over the handlebar. Its bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar—a design which is less prone to damaging lightweight bars and allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. Built from life and all that inspires it, the Classic Toyon builds upon the proven and celebrated C220 design with a fresh, squared aesthetic that adds to the overall harmony of modern frame designs—matching its good looks with enhanced confidence and a more lively feel for wherever your rides take you. - Perfect match for the Classic Kyote handlebar - 6-degrees of positive or negative rise - 1-1/8" steerer diameter - Material: 2014 alloy - Bolts: stainless steel - Lengths: 60mm - Angle: 84°/6° - Bar clamp diameter: 31.8mm - Bar clamp width: 44mm - Steerer diameter: 1-1/8" (28.6mm) - Steerer height: 42mm - Weight: 117g (100mm)
$79.95
Designed specifically for 1-1/8" steerer.
$70.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Perfect match with Descendant handlebars - 3D forged 7075 - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
$70.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars—not that you’re worried about that kind of thing. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Colors: Black - Material: Al-7075 - Lengths: 40mm, 50mm, 60mm - Bolts: Steel - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
$70.00
Built strong to take on the world's toughest trails, Descendant stems keep you pointed in the right direction. - Bar Clamp Diameter (mm): 31.8 mm - Material: Aluminum - S.H.I.S. Stem Clamp Diameter: 28.6
$69.99
All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model stem pushes our Oversized Technology to the extreme as it maximizes the shift of material from low stress zones to the Oversized interface. These stems are engineered for the smaller-sized racers. -Lightweight 3D Hollow Design -Front-Load Clamp Design to Fight Pull-Up Forces -Large Bar Bore -Large Hollow Clamping Bolts -Superior Strength
$69.99
EA70 alloy continues to provide an impressive balance of performance and value. From lightweight aluminum tubing, to 3D forging processes and our TopLock technology, Easton alloy stems integrate careful design choices into the lineup. The EA70 stem is also compatible with the ICM integrated Garmin mount. - 3D Forged EA70 Alloy - Easton ICM direct-mount faceplate computer mount compatible - TopLock Design for easy bar installation - Finish: Black Ano - Weight: 132g (100mm/0) - Rise: +/- 7 degrees - Clamp Diameter: 31.8mm - Steerer: 1 1/8"
$69.99
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.
$69.99
Aaron Ross' signature Boss v2 stem is a classic top-load, 6-bolt design. Along with other Odyssey v2 stems, the bolt heads have been upgraded to a larger size and the clamping area features unique surface contouring for superior handlebar grip - Special surface contouring and a larger bolt head spec for superior handlebar grip - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter)
$69.99
The pro from down under, Boyd Hilder, is also getting a signature stem in our lineup, and it's well deserved. Boyd likes the familiar design DNA of our stems, but had specific Specs in mind to suit his all-around riding style. Clean looks, comfortable reach/rise, and a palm tree etching so you can take the beach-y vibes with you. - Boyd Hilder Signature - Unique surface contouring for superior handlebar grip - Six bolt clamping configuration - 6061-T6 aluminum, CNC machined
$69.99
The Odyssey Broc v2 stem is a refined update to Broc Raiford's popular signature Raft stem. The Broc stem utilizes a classic top-load and 6-bolt design, but it now comes with a slightly taller 33mm rise and sleeker lines below the clamp. The bolt heads have been upgraded to a larger size and the clamping area features unique surface contouring for superior handlebar grip. - Special surface contouring and a larger bolt head spec for superior handlebar grip - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter)
$69.99
Tom Dugan's signature DGN v2 stem is a classic top-load, 6-bolt design. Along with other Odyssey v2 stems, the bolt heads have been upgraded to a larger size and the clamping area features unique surface contouring for superior handlebar grip - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter)
$69.99
Matt Nordstrom Signature edition stem features special surface contouring and a larger bolt head spec for superior handlebar grip. - Six bolt clamping configuration
$69.99
With Corey Walsh officially on the Odyssey PRO team as of 2021, talks of signature parts started right away. Odyssey needed a stem that suited Corey’s needs and riding style, so they got working on that quickly. This stem is unique to our line up given its reach and rise, and it is surely ready to rip! - Corey Walsh Signature - Unique surface contouring for superior handlebar grip - Six bolt clamping configuration - 6061-T6 aluminum, CNC machined
$69.99
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
$69.99
Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.
$59.99 - $69.99
- Strong yet competitively lightweight alloy single crown stem for all disciplines - Unique style, modern geometry, and rock-solid construction, without the heavy price tag - Dial your fit with micro-increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, DJ, E-Bike
$69.95
- Adjustable 7050 alloy road stem - 2-axis pivoting system for setting ideal rise and reach
$67.99
The Stacked stem features a taller 6061-T6 construction. - CNC machined logo
$66.00
Whether you’re trying to hold your line on a jackhammer descent or stick a landing on a 20-foot gap jump, you need confidence and control. The heart of the beefy HOLZFELLER Stem is its 6066 aluminum body, 3D forged into a thing of beauty with all-new graphics. It takes design cues from the lighter AKA Stem, but has added strength for the most extreme DH and Freeride situations. The HOLZFELLER features a 2-bolt steerer clamp and 4-bolt handlebar clamp and weighs less than 200g (190g for a 40mm length). It’s available in two color choices and three lengths: 40mm, 55mm or 60mm. HOLZFELLER Stem is also available with a larger 1.5-inch steerer tube diameter.
$64.99
Dakota Roche signature stem. Beefy but slick 1" OD clamping area for extra strength. - Bar Clamp Diameter (mm): 25.4 - Steerer Clamp Diameter: 1-1/8" ins
$64.99
Wider and beefier with and improved clamping area and recessed compression bolt for a clean look. - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8" ins - Stem Type: Top Load
$64.99
Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.
$64.99
The Chester 35 Direct Mount stem is a practical 2-piece design with big bold graphics and that legendary bomb-proof Race Face toughness baked right in. - The Chester 35 direct mount stem is an all new 2 piece direct mount design - Forged and machined from 6061 aluminum - Weight saving single bolt faceplate - Four bolt bar clamp holds bar securely in position. - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates 'stress risers' which can cause your bar to bend or break
$62.00
Simple, elegant, lightweight design can be run in negative or positive position for -17°/ 17° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 162g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±17°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 73° (±17°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm - Finish: Matte Black with White Accents