Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Stems

Syntace Megaforce 2
$99.00
Syntace's Megafroce 2 stem is intended for all-mountain and downhill riding and comes in a range of sizes with a focus on torsional stiffness and weight savings. The 42mm wide bar clamp area stiffens up cockpits with bars wider than 700mm Titanium bolts help keep the weight low and strength high. - Stack height: 36mm - Weight: 132g (70mm)
Whisky Parts Co. No. 7 Stem
$40.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
TruVativ AKA Stem
$47.00 - $53.00
TruVativ's AKA Stem is 3D forged from 7050 aluminum for durable strength in all conditions. Four bolts attach the faceplate for a vise-like grip on your bars, and the 2-bolt clamp secures to your steerer for pinpoint steering precision and stiffness. This stem perfectly balances weight and strength for your trail or all mountain bike.
Sunday Freeze Topload Stem
$29.99
Sunday’s Freeze Topload Stem uses a die-cast aluminum body with forged 6061-T6 aluminum face plate rocking an embossed Sunday logo. It has recessed sides and bottom section to reduce weight without losing an ounce of strength. With their careful material and design choices, Sunday is able to offer the same stem used by the Sunday team at a very affordable price. - Reach: 52mm - Stack Height: 33mm - Rise: 34mm (1mm drop when inverted) - Clamp Bolts: M6 x 1.25mm pitch (x4) - Pinch Bolts: M6 x 1.25mm pitch (x2) - Weight: 10.5 oz
Cannondale Headshok Stem
$65.00
Designed for use with Cannondale's Headshok (sold separately), the Headshok Stem is tough, light, and ready to ride. - Sleek styling with maximum strength and stiffness - Forged from a single block of lightweight 2024 aluminum with our patented OPI 3D forging process, these stems are exceptionally light and strong - 31.8mm clamp interface - Weight: 185 grams (100mm length)
3T Arx II Pro
$70.00
3T's Arx II is a subtle refresh of the well-liked Arx alloy stem, which has found a place on every sort of bicycle since its launch in 2007. The faceplate is drawn in tighter at top and bottom for a more ovalized frontal appearance, while retaining the cutout 3T logo. The sides of the extension are slightly flattened for a more sculpted look by comparison with the tubular section of the first-generation Arx. A single M7 bolt clamps the stem to the fork steerer, instead of the twin M5 bolts previously used, and the Allen bolts used on the original Arx have been replaced by no-strip Torx bolts. - Stack height: 40mm - Weight: 135g (110mm)
Origin8 Flow MTB/Road Stem
$34.99
3-D forged AL6061-T6 alloy construction - 40mm stack height - 4 bolt front loading faceplate design
Chromag HiFi 35
$104.00
Chromag's HiFi V2 stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 175 grams (35mm length) - Low stack height
Promax DA-1 Stem
$69.99
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
Ritchey WCS Carbon Solostreem Handlebar/Stem
$499.95
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)
TruVativ Stylo T30 Stem
$59.00
TruVativ's Stylo T30 Stem is 3D forged from 7050 aluminum for that perfect balance of low weight, stiffness and precision steering control uphill or downhill. Four bolts securely attach the face plate and also make changing out handlebars a breeze.
TruVativ Holzfeller Stem
$64.00 - $66.00
Whether you’re trying to hold your line on a jackhammer descent or stick a landing on a 20-foot gap jump, you need confidence and control. The heart of the beefy HOLZFELLER Stem is its 6066 aluminum body, 3D forged into a thing of beauty with all-new graphics. It takes design cues from the lighter AKA Stem, but has added strength for the most extreme DH and Freeride situations. The HOLZFELLER features a 2-bolt steerer clamp and 4-bolt handlebar clamp and weighs less than 200g (190g for a 40mm length). It’s available in two color choices and three lengths: 40mm, 55mm or 60mm. HOLZFELLER Stem is also available with a larger 1.5-inch steerer tube diameter.
Cannondale 1.5-inch Stem
$65.00
Cannondale's 1.5-inch Stem comes in plenty of options to fine-tune the fit on your bike. This stem works with larger 1.5-inch steerers, frequently found on Cannondale's front-suspension bikes. Using Cannondale's One-Piece-Integration process, it's made of a single piece of durable, lightweight 2024 aluminum.
Sunlite Cruiser Double Quill Stem
$13.99
• Aluminum • 4-bolt clamp • 8.5 inches tall
Sunlite Alloy 2-Bolt Quill Stem
$21.99
• Forged aluminum • Classic streamlined shape • 2-bolt clamp • 180mm tall
Sunlite Steel Touring Quill Stem
$13.99
• Steel • Polished-chrome finish • 1-inch model has 22.2mm quill, 15/16-inch model has 21.1mm quill • 10-inches tall (extra tall)
Origin8 Pro Fit Aluminum Ergo Stem
$30.00
- Steerer Diameter: 1" or 1-1/8" (includes shim) - Length: 70, 90, 110mm - Bar Clamp: 25.4 or 31.8 (includes shim) - Angle: +/- 35 degrees - Material: 6061 Aluminum - Shot-peen finish
Renthal Duo Stem
$129.90
- High strength and ultra-low weight combined with a low 40mm stack height make for a great all around stem - Stem is horizontally divided and machined in two pieces, enabling weight to be reduced to the absolute minimum without compromising strength
Promax Impact Mini Stem
$49.99
There's no reason a bantam-sized rig shouldn't have the advantages a top-notch stem provides. Promax's Impact Mini Stem fits the bill with rock-solid bar clamping, stunning good looks, and the stiffness to nab the holeshot and keep it on-line through the berms. Set that mini up right! - Cold-forged and CNC-machined from 6061-T6 aluminum alloy - Top-load clamp design - Fits 1-inch steerer tubes
Dimension Trail Stem 35.0
$35.00
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
Evo E-Tec Stem
$29.99
- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 25.4mm handlebar clamp - M6 Black hardware - Weight: 161g (110mm)
Spank Spike Race 2 Stem
$49.90
- Micro Grain Refined (MGR) alloy - 5mm headset spacer included - 2D forged MGR alloy - CNC weight optimized - Shotpeen anodized - Key technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy,CNC Weight Optimized - Length (mm) : 35 / 50 - Rise : 0 Degree - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): 150 (35mm) / 180 (50mm) - Finish: Shot peen anodized, laser logos
Renthal Integra 35
$109.95
- CNC machined 6082 aluminum body - 7075 aluminum clamps - Unique 240-deg C-shape clamps - Minimal 6-bolt design - U-shape cradle clamp eliminates handlebar stress raisers found with traditional stems - Ultra-wide 64mm clamp width
Ritchey Classic C-220 Stem
$69.95
You really can have it all; Ritchey's WCS C-220 stem features revolutionary stiffness and classically inspired good looks, but it’s quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3d forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Silver Finish - 121g (110mm)
Origin8 Classic Pro Quill Stem
$19.99
Origin-8's Classic Pro Quill Stem is crafted from light and durable forged 6061 aluminum with chrome-plated steel bolts. The handlebar clamp bolt is hidden for a clean look. This sweet stem has a polished anodized finish for durability and style. Different lengths are available for customizing the reach to your handlebars.
Origin8 Classic Sport Quill Stem
$15.99
Origin-8's Classic Sport Quill Stem is crafted from light and durable forged 6061 aluminum with chrome-plated steel bolts. The handlebar clamp bolt is hidden for a clean look. Different lengths are available for customizing the reach to your handlebars. This sweet stem is 180mm tall from the bottom of the bolt to the top of the stem so that you can raise and lower your bars, too.
Sunlite ATB/Urban Quill Stem
$25.99
• Forged aluminum • Anodized finish • 2-bolt clamp • 150mm tall
Odyssey RAFT Stem
$64.99 - $74.99
Using Odyssey's popular TL48 stem as a springboard, Broc Raiford's signature RAFT stem is a classic top load design. FEATURES - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter) - 6061-T6 aluminum, CNC machined
Parlee Cycles Stem
$325.00
Parlee’s carbon stem is a masterpiece of strength, beauty and performance. It utilizes a 35mm bar clamp diameter that offers sharp steering precision while the two-part face plate is forged for longevity. Titanium bolts are mated to replaceable aluminum inserts throughout, protecting your investment from cross threading and other mechanical damage. - Weight: 125g
Promax Banger Stem
$49.99 - $69.99
Promax Banger stems have a front-load design and can be used with either side up, providing a 5-millimeter drop or rise. Available with 48-millimeter and 53-millimeter extensions, they are cold forged from the highest quality 6061-T6 aluminum then CNC machined to enhance the shape and further reduce weight. - Stack height: 30.5mm
3T Arx LTD
$335.00
Arx, Latin for stronghold and bridge, is 3T’s race-proven design for the perfect connection between fork and handlebar and suited to all cycling disciplines. Clamp design is optimized to ensure a secure fit on composite steerers and bars without the need for potentially damaging high torque values during assembly. 3T inhouse tests show Arx’s clamp by far exceeds the CEN standard, and also that it works very well with other brands of handlebar. Arx Ltd is the carbon-fiber version of the stem, with Ti bolts. Super-light and super-stiff, it is a highly evolved, modern design weighing just 118g.
Thomson Direct-Mount Stem
$109.95
With the best materials and construction, torsional stiffness fit for the hardest riding and biggest jumps, and the great style that's in all of Thomson's components, their Direct-Mount Stem is the perfect upgrade for your DH rig. It's made of tough 7000-series aluminum bar stock with heat-treated bolts and it has a 65mm-wide handlebar clamp so you get rock-solid steering and control and outstanding durability.
Origin8 Pro Fit Mountain Quill Stem
$27.99
- Forged aluminum construction - 4-bolt handlebar clamp - Quill length: 180mm - Steerer Diameter: 1-inch - Length: 90, 110mm - Clamp Diameter: 31.8mm - Rise: 25 degrees
Chromag HiFi
$99.00
Chromag's HiFi stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 200 grams - Low stack height
FSA SL-K Stem
$81.99
The updated SL-K stem is lighter than ever – just 141g for the 100mm length. Using high-strength 2014-aluminium and sophisticated forging and machining, FSA finely controls the amount of material used to cut weight. - 3D forged and CNC machined AL-2014 - Carbon fiber faceplate - Chromoly hardware
Pro PLT Stem
$59.99
- 3D forged AL-2014 construction - Sizes: 50 - 130mm, 10 deg. angle - Suitable for 1-1/8" forks - Diameter handlebar clamp: 31.8mm - Headlock system for a secure front clamp fixation
Ritchey Superlogic C260 84D Stem
$269.95
Ritchey's first full-carbon stem was designed to meet the needs of high-wattage European Classics specialists. The Carbon C260 adds to the amazing strength-to-weight ratio of our C260 alloy and Carbon Matrix stems through the use of high modulus carbon fiber, increased boom diameter, and a wider clamp. Gram-for-gram, this is the lightest, stiffest full carbon stem on the market, making it the most advanced Ritchey stem ever. - C260 bar clamp creates a larger stem-to-bar interface, drastically reducing bolt stress - 4 x T-20 faceplate bolts and patented 260-degree bar clamp design reduces weight, increases stiffness, and distributes stress more evenly - 3 x T-20 steer tube bolts and curved clamp slot reduces weight and steer tube stress - Fits most road and mountain bars - Material: Carbon with 2014 alloy faceplate - Length: 90mm - Angle: 84/6 degree - Stack: 42mm - Faceplate width: 42mm - Steerer: 1-1/8" - 125g (110mm)
Ritchey SuperLogic C-260 Carbon Stem
$269.95
When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.
Chromag BZA 35
$147.00
Chromag's BZA 35 stem is strong, light, and burly. Featuring a 35mm bar/stem interface and weighing a perfect 165 grams this stem is light yet extremely stiff for positive control. - CNC profiling - Weight: 165g (50mm length)
Ritchey WCS C220 73D Stem
$89.95
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 73D Stem offers 17-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 73/17 degree - Stack: 45mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
Origin8 Fix8 Stem
$34.99 - $35.99
Origin-8's Fix8 Stem is a nice upgrade for your super-cool fixed-gear bike and perfect for mountain bikes, too. It's forged from lightweight and durable aluminum and features a 4-bolt face clamp that holds fast and makes bar installation/removal quick and easy. Plus, the opposing steerer clamp bolts apply more even holding force to keep your bars from changing position. At 50mm long, this stout stem is great for flatland tricks, bar spins, and anything else you come up with.
Origin8 Flux MTB/Road Stem
$64.99
Full CNC machined AL6061-T6 alloy construction - 40mm stack height - 4 bolt front loading faceplate design - EN-Mountain safety certification
Ritchey WCS C220 84D Stem
$89.95
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
Sunlite Threadless Alloy Road Stem
$29.99
- 3D forged 6061 alloy road stems in 6 or 17 degree angles - Lightweight 4 bolt faceplate - Material: AL6061-T6 - Finish: Sandblasted
Origin8 Pro Fit Alloy Ergo Stem
$33.99 - $35.00
Origin-8's Pro Fit Alloy Ergo Stem is a great upgrade for road and mountain bikes. It's 3D forged from lightweight and durable 6061-T6 aluminum. It has a 4-bolt, 2-piece face clamp that shaves grams and makes for quick and easy handlebar installation/removal. Plus, the opposing steerer clamp bolts apply more even holding force to protect the fork and keep your bars from changing position.
Whisky Parts Co. No. 7 Mountain Stem
$40.00 - $45.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components. - Bead-blasted, then anodized, finish - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation
Race Face Atlas DM 35
$99.99
The RaceFace Atlas 35 direct mount stem is an all new 2-piece direct mount design. Super lightweight, low profile design with flush mount bolts and 5mm spacers kit to let you dial in your perfect set up. - Machined from 2014 Aluminium - Weight-saving single bolt faceplate
Race Face Aeffect R 35 Stem
$59.99
Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.
Easton EA90 - ICM
$149.99
Your stem may seem inconsequential, but it is the point of transfer between your skilled handling and the bike itself. An impressive refinement of our popular top level Easton alloy stem, the 2019 EA90 stems have an larger boom diameter for increased stiffness and, by utilizing our highest quality alloys, we were able to remove excess material for even more weight savings. We’ve also created a custom computer mount (included with EA90 stems and sold separately) that is compatible with all ICM faceplate stems for cleaner lines and improved aerodynamics. With lengths ranging from 70mm to 130mm, we can accommodate fits for all sizes of frames and riders. We shaved our new EA90 down to 120 grams for a 100mm stem and, with weights like these, we surpass much of the alloy and carbon competition in the market, while giving you the durability, confidence and control you expect from Easton. - Finish: Black Ano - Weight: 120g (100mm) - Rise: +/- 7-deg - Clamp diameter: 31.8mm - Steerer: 1 1/8-inch - Length: 70mm, 80mm, 90mm, 100mm, 120mm - Materials: EA90 alloy - Tech: ICM compatible (faceplate mount included), Top Lock, Taperwall
Dimension 31.8mm Threadless Stem
$29.99 - $34.99
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
Profile Design 1/ZeroSeven
$54.99 - $57.99
Simple, elegant, lightweight design can be run in negative or positive position for -7°/ 7° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 167g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±7°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 83° (±7°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm
Race Face Turbine R 35 Stem
$104.99
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation
Profile Design 1/Seventeen
$54.99 - $57.99
Simple, elegant, lightweight design can be run in negative or positive position for -17°/ 17° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 162g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±17°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 73° (±17°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm
Origin8 Fix8 OS Stem
$43.99
Origin-8's Fix8 OS Stem is the perfect upgrade for your super-stylish fixed-gear bike and it'll work on mountain bikes, too. It's 3D forged from lightweight and durable 6061 aluminum and features a 4-bolt 31.8mm-diameter handlebar face clamp that holds fast and makes for quick and easy handlebar installation/removal. Plus, the opposing steerer clamp bolts apply more even holding force to keep your bars from changing position. At only 50mm long, the Fix8 is great for flatland tricks, bar spins, and anything else you come up with.
Sunlite Adjustable Sport Quill Stem
$39.99
• Forged aluminum • 2-bolt clamp • 180mm tall
Syntace Flatforce Stem
$119.00 - $139.00
The Syntace Flatforce stem utilizes a 12mm drop for all length options, allowing riders to keep their MTB handlebars in a lower riding position. - 200° clamp face increases handlebar strength and fatigue life - 42mm wide bar clamp for increased handlebar support - Super-low handlebar position solution for unique fit requirements - Sabertooth bar clamp design insures no bolts or clamping surfaces protrude - Stack Height: 27mm
Promax S-29 Stem
$69.99
Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.
Promax S-35 Stem
$69.99
Promax takes handlebar control up a notch with their S-35 Stem. Its oversize 35mm handlebar clamp cranks up the cockpit stiffness without adding weight or sacrificing any strength. - 3D cold-forged and CNC-machined from 6061-T6 aluminum alloy
ENVE Aero Road Stem
$300.00
An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world. This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise. - Material: Carbon - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 42.5mm with length shim / 45.5mm with angle shim - Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm - Torque Spec, Steer Tube: 5.5Nm
Salsa Guide Trail Stem
$40.00
The Guide Trail Stem is lightweight, durable, and provides excellent steering response. Available in super short lengths for use on new-school trail bikes with wide bars, short rear ends, and long front-center geometry. - AL-6061-T6 aluminum construction - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design - 31.8mm bar clamp - Bead-blasted, then anodized, finish
Page 1 of 3 Next page