Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other
$149.99
Gain an aerodynamic advantage with Origin-8's Tri Clip-On Aero Bars. These aluminum clip-ons fit a wide range of handlebars. With independent arm rests and bar-angle and reach adjustments, it's easy to get a great-fitting aero setup.
$14.99
Lightweight aluminum alloy
- Non-Keyed
- Height: 20mm
- 10 to a bag
$12.99
- CNC-machined chromoly steel lockrings
- 1.29" x 24tpi LH
$7.99 - $8.99
- Machined AL6061 alloy construction
- Center sleeve for use with Revolvr outboard bottom brackets
- Converts 68/73mm outboard bottom bracket to a 100mm or 120mm fat bike model
- Seals and protects the bearings from harmful contaminants
- Center sleeve only: Revolvr outboard bottom brackets sold separately
$44.99
Replacement pulley set with ceramic bearings. Compatible with 7,8,9, and 10-speed Campagnolo, Shimano, and SRAM drivetrains.
$6.59
Origin8's Twistr 15mm Top Cover is a high profile 15mm top cover for Origin8 Twistr Series headsets. This CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings.
$7.99
- Anti chain-suck device
- Allows the front derailleur to be adjusted for strong downshifts
- If not using front derailleur the device can act as a chain guide
$15.19
Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.
$16.99
Is your seat post just a hair too small for your frame? Origin-8's Multi-Fit Seat Post Shim is a great solution.
• Multi-Fit
• Aluminum
• 25.4mm internal diameter
• 28.0mm outer diameter
$35.99
- Converts a cassette hub to a single speed
- 8 spacers included in various sizes to adjust chain line
- Available in black or red anodized 6061 aluminum
- Fits Shimano style cassette bodies
- Conical spacers for increased cog stiffness
$11.99
Forged AL6061-T6 alloy construction with CNC groove design
- Machined insert for even clamping force
- For use with carbon seat posts
- Ultra-lightweight
$33.99
- AL6061 alloy construction
- Non-keyed design
- Jar of 40 spacers
$14.99
Origin-8's Grip N Seal QR Seat Clamp is forged from light and durable aluminum and features a rubber weather seal and an anodized finish to prevent corrosion. Its high-leverage quick-release lever makes it easy to raise/lower your seat.
$24.99 - $30.99
Origin-8's Carbon Fiber Headset Spacers are made of lightweight, durable carbon and come in 5mm, 10mm or 20mm thicknesses. You get a bag of five spacers.
$24.99 - $30.99
- Unidirectional carbon fiber 1-1/8" headset spacers
- Sold in bags of 5
$33.99
- 3-piece expander design provides a secure fit within carbon steerer tubes
- 22-25mm range of expansion
- 50mm height reinforces your carbon steerer tube beneath the stem
- New design evenly distributes headset compression forces
- Lightweight AL6061 alloy construction
- Stainless steel bolt
$92.99
- Provides enhanced chain retention for all 1x drivetrain systems
- CNC machined AL6061 alloy mount with dual-compound chain guide
- Co-molded composite and TPR guide plates greatly reduce noise from chain contact
- Compatible with 28-38T circular and 26-36T oval chainrings
- Boost-compatible
- Easily adjustable
- Mounting hardware included
$17.99
Seatpost clamp with integrated cover prevents dirt and mud from entering the frame at the seatpost junction
- Chamfered edges and ovalized hole design protects carbon frames and seatposts
- AL6061-T6 alloy clamp with NBR cover
- 31.8mm for 27.2mm seat posts and 34.9mm for 31.6mm seat posts
- 16mm height
$3.99
Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications.
- Stainless steel
- 6mm I.D.
- 10 per bag
$16.99
• Emergency universal replacement derailleur hanger
• CNC machined aluminum construction
• Anodized and laser etched finish
$33.99
Origin-8's Down Tube Shifter Adapter is perfect for mounting down tube style shift levers on a bicycle that doesn't have provisions on the frame for them. It's made of light and durable machined aluminum with an anodized finish and fits frames with 1 1/8- to 1 1/4-inch diameter down tubes. Mounting hardware and shims are included.
$64.99
- Provides enhanced chain retention for all 1x drivetrain systems
- CNC-machined AL6061 alloy mount with dual-compound chain guide
- Co-molded composite and TPR guide plates greatly reduce noise from chain contact
- Compatible with 28-38T circular and 26-36T oval chainrings
- Boost-compatible
- Easily adjustable
- Mounting hardware included
$10.99
Origin-8's Low-Profile Ahead Cap is a sleek option for your a 1 1/8-inch fork/headset. It includes the bolt and star nut.
- For 1-1/8-inch forks
- 30 grams
$23.99
- Converts CenterLock road hubs to accept 6-bolt rotors
- Low-profile design for road disc applications
- Compatible with standard Quick Release as well as Thru-Axle road hubs
- Extruded alloy collar with CNC shoulder pins and lock ring
- Eliminates the need for rotor bolts
$94.99
• Converts a cassette hub to a single speed
• 8 spacers included in various sizes to adjust chain line
• Anodized 6061 aluminum
• Fits Shimano/SRAM cassette bodies
• Conical spacers for increased cog stiffness
• Includes single-speed guide, spacers, as well as 18T & 16T cogs
$39.99
• Chain tensioner w/integrated derailleur hanger
• Fits most 3/8-inch horizontal dropouts
$64.99
- Provides enhanced chain retention for all 1x drivetrain systems
- CNC-machined AL6061 alloy mount with dual-compound chain guide
- Co-molded composite and TPR guide plates greatly reduce noise from chain contact
- Compatible with 28-38T circular and 26-36T oval chainrings
- Boost-compatible
- Easily adjustable
- Mounting hardware included
$6.99
Chrome plated heat treated bolt
- Forged steel conical wedge
- For 1-inch steer tubes
$13.99
- Replaces existing top cap, and allows the use of a bottle cap as a decorative cover
- Compatible with both twist off and crimped style bottle caps
- Bottle cap is held in place by two strong magnets
- Easy to switch out bottle caps
- AL6061 alloy cap and AL7075 alloy bolt
$39.99
• Machined alloy arm
• (ISCG Mount) international standard
• Adjustable design
• Sealed cartridge bearing
• Prevents dropped chains on mountain bikes