- Replacement pad set for Origin 8's Tri Clip-On Aero Bars
• Anti chain-suck device • Allows the front derailleur to be adjusted for strong downshifts • If not using front derailleur the device can act as a chain guide
Is your seat post just a hair too small for your frame? Origin-8's Multi-Fit Seat Post Shim is a great solution. • Multi-Fit • Aluminum • 25.4mm internal diameter • 28.0mm outer diameter
Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.
• Converts Braze-on front Derailleurs to clamp on • Lightweight forged alloy • Weight: 28g
Origin-8's Down Tube Shifter Adapter is perfect for mounting down tube style shift levers on a bicycle that doesn't have provisions on the frame for them. It's made of light and durable machined aluminum with an anodized finish and fits frames with 1 1/8- to 1 1/4-inch diameter down tubes. Mounting hardware and shims are included.
Standard replacement star nuts for threadless steerers.
$30.00 - $57.99
• Machined aluminum mounting arm • Delrin (engineering grade thermoplastic) chain guide body • Adjustable design • Fits 32T to 38T chainrings • Compatible with 1x drivetrain systems • Clamp mount: 31.8-34.9mm • Weight: 75g (BB Mount), 88g (clamp mount), 80g (Mini)
$17.99 - $19.99
Origin-8's Quill Adapter allows you to use modern threadless stems on bicycles with threaded forks that take quill stems (stems with bolts in the center). The Quill Adapter is made of light and durable 7075 aluminum and features a chromoly bolt.
Gain an aerodynamic advantage with Origin-8's Tri Clip-On Aero Bars. These aluminum clip-ons fit a wide range of handlebars. With independent arm rests and bar-angle and reach adjustments, it's easy to get a great-fitting aero setup.
• 6061-T6 tubular aluminum construction • Laser etched graphics • Independent arm rest and bar adjustment • Does not include armrests • Cannot mount shifters onto ends • Clamp diameter: 25.4-31.8mm • Extension length: 105mm
• Fits 3/8" Axles • Lightweight, compact design • Forged aluminum construction • Chromoly bolt
- Anodized or powder coated finish - Allows for secure clamping - Forged aluminum construction - 34.9mm clamp diameter
Connecting links for Origin8 chains - Enviromentally friendly coating passes 1000 hour salt spray test
Replacement pulley set with ceramic bearings. Compatible with 7,8,9, and 10-speed Campagnolo, Shimano, and SRAM drivetrains.
Origin-8's Grip N Seal QR Seat Clamp is forged from light and durable aluminum and features a rubber weather seal and an anodized finish to prevent corrosion. Its high-leverage quick-release lever makes it easy to raise/lower your seat.
$3.99 - $11.99
Connecting links for Origin8 chains
Switching over to hydraulic brakes? Secure your cables with Origin-8's Hydraulic Pass-thru inserts. They will securely hold the hydraulic hose in place while you ride. • Fits bicycles with pass-thru braze-ons • Holds hydraulic hose securely in place • Bag of 10
• Machined alloy arm • (ISCG Mount) international standard • Adjustable design • Sealed cartridge bearing • Prevents dropped chains on mountain bikes
• Converts any multi-speed bike to a single speed • Ceramic bearing pulley wheel for reduced resistance • Mounts to frame derailleur hanger • Adjusts for perfect chain tension • Lightweight, minimalist design
• Chain tensioner w/integrated derailleur hanger • Fits most 3/8-inch horizontal dropouts
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
This is a bottom bracket adapter that works in conjuction with Origin8 Revolvr BB86/92 Thread-Together bottom brackets to create a PF121 Thread-Together bottom bracket. - Cup Material: AL6061
- Push-in replacement CNC alloy bar end plugs - MTB-specific design - Anodized alloy end caps - Compatible with most handlebar styles - 20mm OD plug/25mm OD end cap (Road) - 20mm OD plug/30mm OD end cap (MT
- Expanding replacement bar end plugs with hex bolt - Anodized alloy end caps - Compatible with most handlebar styles - 18.2mm OD expander/25.5mm OD end cap
- Unidirectional carbon fiber 1-1/8" headset spacers - Sold in bags of 5
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Frame Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
Origin8's Twistr 15mm Top Cover is a high profile 15mm top cover for Origin8 Twistr Series headsets. This CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings.
Replacement brake hoods for Origin8 Classique Sport road levers
Steel 1mm spacer fits Shimano cassette bodies - Great for 10 sp cass on 8/9 sp hubs - Also for many other fit applications
Page 1 of 2 Next page