Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Electronics

Sigma Sport STS/ROX Speed/Cadence Set
$59.99
Sigma Sport's STS/ROX Speed/Cadence Set includes everything needed to set up a second bike for your Sigma Sport computer. It's compatible with their ROX and STS models (computers sold separately).
Sigma Sport Topline 16 Docking Station
$29.99
Double sided docking station to connect TOPLINE 2016 computers to Data Center via USB cable. Compatible models: - PURE 1 - PURE 1 ATS - BC 5.16 - BC 7.16 - BC 7.16 ATS - BC 9.16 - BC 9.16 ATS - BC 14.16 - BC 14.16 STS - BC 16.16 - BC 16.16 STS - BC 23.16 STS *For TOPLINE 2009 & TOPLINE 2012 use model number 00120.
Sigma Sport Wired universal computer mount
$14.99
Sigma's universal computer mount features a wired speed sensor, so you can use your Sigma cyclo-computer on a second bike. This kit comes with O-rings and a spoke magnet.
Sigma Sport iD.Go
$44.99
If you are looking for an affordable, easy-to-use sport watch with heart rate functions, the iD.GO is the right choice for you. The iD.GO will provide you with ECG accurate heart rate information during all of your activities. With three functions and single large button, the iD.GO is very easy to use. All values are shown on one display with large easy to read digits. The iD.GO fits every wrist. Functions: - Heart rate - Stop watch with display down to one tenth of a second - clock Features: - Analog heart rate transmission - ECG Accurate - Top button
Shimano BMDN100 Di2 Long Battery Mount for External Wiring
$121.99
Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Shimano BT-R1A External Di2 Battery
$75.99
Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams
Shimano STEPS CITY E6000 Cycling Computer
$74.99
Smooth and Silent Riding with INTELLIGENT POWER : Discover high-level E-bike performance. Shimano STEPS lifts E-bike enjoyment to the next level by optimally balancing range, lightweight performance, and low noise—with battery power to spare. SENSOR TECHNOLOGY : Shimano STEPS incorporates sensors that pick up information about torque, speed, cadence, and crank position so that the system can provide smooth and optimally matched pedaling force. -Integrated sense of design with the handlebar - Center mount for easy viewing while riding - Displayed parameters: assist mode, battery charge level gear position, estimated range, range overview - Intuitive display layout - Angle can be adjusted to suit a variety of riding positions
Shimano STEPS CITY E6010 Cycling Computer
$148.99
Smooth and Silent Riding with INTELLIGENT POWER : Discover high-level E-bike performance. Shimano STEPS lifts E-bike enjoyment to the next level by optimally balancing range, lightweight performance, and low noise—with battery power to spare. SENSOR TECHNOLOGY : Shimano STEPS incorporates sensors that pick up information about torque, speed, cadence, and crank position so that the system can provide smooth and optimally matched pedaling force. Sleek bar-mounted cycling computer with easy-to-read high-contrast display. - The easy-to-read computer has every function you’ll need for a successful outing - Computer functions include speed, distance, trip time, clock, gear, estimated range, battery indication - Accurate, reliable, supple switching between all three power-assist modes regardless of weather conditions
Shimano Short Battery Mount External/Internal Wiring
$118.99
Shimano Di2 External Battery Mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Serfas Level 1+ Backlit Wired Speed
$30.00
See your ride data in any light condition with Serfas' Level 1+ Backlit Wired Speed Computer. It provides 9 important functions and displays your data big and bold on a backlight LED screen. Other great features include the ability to choose between kilometers or miles as well as auto start/stop, so your rides never go unrecorded. And, whether you choose handlebar or stem mounting, installation is a breeze. • backlit led • new large screen • handlebar & stem mountable • auto start/stop • km or mi selectable
Serfas Level 1.1 Wired Computer
$20.00
Easy to set up and easy to use, Serfas' 1.1 Wired Computer provides the riding functions you need and features a crystal clear display. • 9 functions • Handlebar and stem mountable • Multi-language compatible • Auto start/stop
Serfas Level 2.2 Wired Computer
$25.00
Serfas' Level 2.2 Wired Computer puts cycling knowledge at your fingertips. It provides 14 key functions controlled by 2 easy-to-use buttons, and displays your data big and bold. Other great features include a low reflection LCD and the option to select from several languages. And, whether you choose handlebar or stem mounting, installation is a breeze.
Serfas Level 3.3 Double Wireless Computer
$80.00
Serfas' Level 3.3 Double Wireless Computer puts all your helpful and important ride information at your fingertips. Controlled by 2 easy-to-use buttons it provides cadence and 15 other key functions without wires, and it displays your data big and bold. Other great features include a low reflection LCD and the option to select from several languages. And, whether you choose handlebar or stem mounting, installation is a breeze.
Serfas Level 4+ Backlit Wireless Speed
$50.00
Free yourself from the hassle of wires and see your ride data in any light condition with Serfas' Level 4+ Backlit Wireless Speed Computer. It provides 19 important functions and displays your data big and bold on a backlight LED screen. Other great features include a temperature reading as well as auto start/stop, so your rides never go unrecorded. And, whether you choose handlebar or stem mounting, installation is a breeze. • backlit led • new large screen • handlebar & stem mountable • auto start/stop • km or mi selectable
Serfas Level 4.4 Wireless Computer
$45.00
Serfas' Level 4.4 Wireless Computer is ready to take your riding and training to the next level. It provides 22 important functions controlled by 2 easy-to-use buttons and displays your data big and bold. Other great features include a low reflection LCD and the option to select from several languages. And, whether you choose handlebar or stem mounting, installation is a breeze.
SRAM QuickView Adaptor
$5.00
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g
SRAM QuickView Computer Mount (MTB)
$22.00
SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. It works great with computers that use a 1/4-turn twist lock interface.
SRAM QuickView Computer Mount (Road)
$21.00
SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. SRAM's QuickView Computer Mount also features a center-offset design so the computer (sold separately) can be placed directly in front of the stem, or flip it to position the computer behind the bar for MTB or cyclocross use. It works great with computers that use a 1/4-turn twist lock interface.
SRAM RED 1 AXS Quarq Road Power Meter DUB
$1,200.00
In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48T and 50T variants have fully integrated power into a direct mount aero chainring - 36-46T variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - Bottom bracket not included - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE
SRAM RED AXS Power Meter Spider
$599.00
- AXS enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48 - Bolt Circle Diameter (BCD): 107 BCD - Power Meter Type: ANT USB
SRAM RED AXS Power Meter Upgrade Kit
$819.00
- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: Ant USB
SRAM RED AXS Quarq Road Powermeter DUB
$1,200.00
The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included
SRAM RED Quarq Power Meter Crankset
$1,079.00
The crankset is the heart of your bicycle and where you’ll find the SRAM RED Quarq power meter. The sole job of the crankset is to convert the effort from both legs to forward motion. It is the perfect place to measure power. This power meter works for every discipline: Road, triathlon, time trial, and cyclo-cross. The chainrings are replaceable should your bike, discipline, or ability change. - A direct force power meter that measures total power output from both legs with +/-1.5% accuracy - Works for every discipline: Road, triathlon, time trial, and cyclo-cross - No compromises on materials, shifting, wheels, or pedal choice - Proven by pro teams and athletes throughout the world – Cobbled Classics, Giro d’Italia, Tour de France, Vuelta a España, World Championships - Number 1 at the Ironman World Championship for the last three years - Uses a hidden bolt to mount the chainrings – compatible SRAM chainrings ensure the derailment pin lines up behind the crank arm - 10K – programmed with over 10,000 data points to eliminate temperature effects on power measurement - AxCad – A multi-axis accelerometer switches the power meter on and measures cadence, simplifying installation and operation - Breakthrough Materials – Exogram hollow carbon fiber crank arms – the lightest, strongest crank arms SRAM makes – minimize weight and maximize speed [ELSA RS, ELSA R and SRAM RED] - Easy to use (and reuse) – LED indicator and visible ANT+ ID - The replaceable CR2032 battery never leaves you without power - Manual and automatic zeroing make it truly set and forget - Built to Last – IPX7 waterproof rating, 2-year warranty, free firmware updates, and acclaimed international support - Moves with you from bike to bike - With Quarq's free Qalvin app – available for Windows, Mac, iOS and Android – you can set the zero offset, check battery voltage, run diagnostics, and perform firmware updates for free Arm Material: Carbon arms, Machined alloy spider Weight: 778 grams (GXP 172.5mm 53x39 BB not included) * Chainrings and BB sold separately
SRAM RED eTap Bar End Clic Shift Buttons
$121.00
- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter
SRAM RED eTap BlipBox
$330.00
SRAM's BlipBox is the control module that turns your triathlon or time trial machine into a wireless missile. Connected to SRAM RED eTap Blip remote shifters, the BlipBox manages the wireless shifting via AIREA, SRAM’s proprietary communication protocol, allowing immediate shifts from nearly any aero position. - BlipBox mount included - Replaces standard drop bar shift levers - Limitless aero configurations - Up to two positions per side - Fits a standard Garmin mount or the included mount
SRAM RED eTap Blips
$110.00
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls
SRAM eTAP Battery Charger
$42.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap
SRAM eTAP Powerpack
$77.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes up to 60 minutes to complete.The eTAP Powerpack includes a battery charger, cord, transmitter, and international adaptors (US/EU/GB).
SRAM eTap AXS BlipBox
$385.00
Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero. - Replaces standard drop bar shift levers - Simple and intuitive eTap shift logic - AXS enabled for easy personalization - Limitless aero configurations - Two ports per side for Blips - Fits the included optional stem mount - Compatible with existing eTap Blips and Clics - Mounts inside stem faceplate cap, feed box or frame
SRAM eTap Battery
$42.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap